Widest wheels (and offsets) for functionality NOT stance

I have 19x9.5 +30 front and rear, lowered, minimal camber (close to stock) with rear guards rolled. Rear wheels sit pretty flush to fender edge, running a 275/30/19 tyre.
If going lower on your offset you'll need more camber and probably more like a 255 tyre.

 

Fronts will be fine

To fit 9.5 rears properly sized tyres and NO work at all and guaranteed to fit, you need around +38 offset. +30 may also fit but depending on ride height.

If low with just a guard roll you will be able to fit +30. With camber and slight pump of the guard +22.

 

Cheers guys !
I have an option for the rears to be
19x9.5 +35 so that works with a little camber to get it lower.
I will keep the 19x8.5 +30 on fronts.

Thanks

 

Thanks !
Did you notice a change in your speedo running 19s ?

 

speedo depends on tyre choice.

in order to match the stock 225/50/16 rolling diameter, fronts go with a 234/30/19 and rears suggest running 265/30/19.

 

^ yeah as Mike said, depends on the tyre. My 275/30/19's are 2.5% different to stock, the 265/30/19 would be 1.6% different.
Negligible difference really.

 

Thanks guys big help
One more.. will an 18x8 +35 5x114.3 front
And 18x9 +35 5x114.3 rears.
Will these clear calipers and fit relatively flush ?
Cheers

 

yes they'll fit and a lot more easily.

 

Caliper clearance is more to do with the spoke design, test fit if possible otherwise might need a small spacer to clear.