See John's post #4 while u are waiting - pics of Z32 against R34 My next step is to go to Jolly Roger at Dandenong with a tape measure n c if it will fit RWC will go a lot easier if its all factory I've got Q45 axles 30 spline (6 bolt) same as TT but a bit longer and Q45 R200 diff This will all fit in a NA subframe with TT hubs on the outer ends R34 Geometry would be better Then u can look at R34 Front suspension to complete the package http://www.aus300zx.com/forum/showthread.php?t=262902
Sorry for taking Ages to get measurements. This is the S14 subframe. all dimensions are centre to centre and would be within a mm. i stat the subframe mount points horizontal and checked with level to make sure it was straight. The heights at the bottom are from the floor to the tops of the bushes (so their is like 5mm of the centre that sits higher). I havnt had the chance to do the z32 subframe cause i havnt visted the parents for a little while (thats where the subframe is haha) but im sure you have or someone has a z32 subframe they can measure in the meantime.
Man that's awesome, thanks heaps. I can measure my own subframe since it's on stands anyway. Will post back...
no worries, actually keen to see how close it is. if its close enough to make it work, ill most likely go in that direction and chuck that subframe into mine.
I'm really hoping that it might even be as simple as using the GKtech bushings. I was going solid anyway
Fingers crossed it is! i've got solid in mine, helped a bit with tramp, but still the rest of the subframe needs work as well, it still tramps off the line and out of corner when drifting sometimes. but I guess running a locker on street for 12 months doesn't help the rear end haha
Are you sure the S13, Z32 and R32 are the same as the later model S14/15, R33/34 uprights (knuckles) I get the Z32 and R32 are alloy and forks for lower shock mounts. But concerned the angle of the shick mounting point is different I have a complete R33 GTR rear end in my car. I have used R32 upper control arm and radius rod(traction rod) to bolt to the R33 upright Seems the R33 and R32 uprights have different part numbers. But that could be to do with width of shock mount as they have a different bush in them. Keen to get this to work but don't want to fork out for R32 GTR uprights if thats not the fix
Was there ever a definitive answer on whether the subframes work? I'm after subframe bushings and want to know if the nismo ones for other cars, such as the S chassis or R32/33 would possibly fit