Exhaust Vibration/Resonance?

Discussion in 'Technical' started by wassaw7, Oct 31, 2013.

  1. wassaw7

    wassaw7 New Member

    I have 5 bolt Z1 dumps into 3in AMS resonated front pipes into unknown brand cat back exhaust (with H pipe). At around 2,000 - 2,750rpm mainly in 2nd & 3rd gear (manual), I get a bad resonance/vibration/pressure in the cabin. It is of such a low frequency that it is hard to hear but it is definitely the exhaust. Is there anyway to reduce or eliminate this as it is actually painful on the ears & has caused my earwax production to increase at an alarming rate! I am thinking maybe a UAS x-pipe may help where the small H-pipe has not been able to help? Any ideas?
     
  2. Chilledpain

    Chilledpain Z Reaper

    X-pipe will definitely help to change the frequency. The UAS option is exceptional as it has a muffler incorporated further reducing drone and volume ;-) I dare say this will fix all your deep drone issues Marco.
     
  3. wassaw7

    wassaw7 New Member

    Thanks I will give it a try. Funny thing is that there is actually no drone at all - the frequency is so low it just feels like massive in cabin pressure almost like what you get flying!
     
  4. wassaw7

    wassaw7 New Member

    Ok I installed the UAS x pipe a while ago & the problem still remains. What is the best way to remedy this? Cut the resonated test pipes & insert high flow cats? Add a silencer? Thoughts? If going the high flow cats are there any recommendations or just use whatever the exhaust shop can supply?
     
  5. MaxxAction

    MaxxAction New Member

    Do you have cats in the system now?

    Is it required where you are? If not, then you could always add some resonators in the mid pipes.
     
  6. East Coast Z

    East Coast Z Well-Known Member

    Buy better mufflers & save up for the fine if you get caught on the street without cats!
     
  7. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    I get the same at that revs but after that its smooth as butter.
    (that's VG'S has the worse rpm resonance)

    it vibrates and resonates through the car but I thought it was more my engine mounts and solid bushes doing this .

    I also have 3" with no cats but have XPIPE in my exhaust

    doesn't worry me too much becauseracecar :br:


    .
     
  8. rob260

    rob260 Administrator Staff Member

    The way you drive it doesn't stay under 3k for long anyway haha
     
  9. wassaw7

    wassaw7 New Member

    So while I don't have racecar, what is the best way of dampening this vibration & resonance?
     
  10. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    you shouldn't have the vibration just the resonance.

    I've run no cats before and straight through exhaust just drone no vibration

    My vibration is from is from my engine mounts and solid bushes .

    try a centre x pipe muffler (but that wont fix the vibration)


    .
     
  11. wassaw7

    wassaw7 New Member

    Sorry yeah only a little vibration, mostly just resonance. Already have an X pipe. Are you saying to get another put in? I am also gonna get some cats, any recommendations?
     
  12. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    X pipe is not a X MUFFLER

    Any quality high flow cat .

    .
     
  13. Romonski

    Romonski And Justice For All

  14. wassaw7

    wassaw7 New Member

    Thread dig. I got cats put in & the exhaust system is much quieter now. The exhaust system still sounds great, but no more pressure/in cabin resonance. Perfect.
     
  15. zedsr4me

    zedsr4me Member

    Did you put on Sureflo 100 cats?
     
  16. wassaw7

    wassaw7 New Member

    I put in 100 cats, but not sureflo brand
     

Share This Page