Hi all. Could someone please post up a photo of the factory wiring loom that you would use to plug a harness adapter into to wire up a head unit? Previous owner of my z32 hacked everything up and twisted and tape it all. I ripped out the old unit in favour for the unit I've carried across from my old car but the wiring currently looks like this. I would like to restore it to a factory plug, maybe getting a hold of a cut piece and soldering it in. Then I can just use a plug and play harness adapter for simplicity Also, what screw goes here? The hole is inside the AC/lighting control pods, right up the top screwing into a bracket in the cluster area to secure it all together. I've got a bunch of spare screws floating around from the car but none of them match the thread correctly. A pic of the correct screw would be most helpful
You will need a set of these white connectors and this might help with you wire colours http://carstereohelp.net/wireharness_Nissan1.htm Its a small gold coloured screw
Its an odd looking screw, gold with a long hex shaped Philips head. Theres heaps of em in my box of zed bolts. You find em you can have em