90 TT 2+2 Brakes jerk just before stopping still

Discussion in 'Technical' started by eddy400d, Aug 11, 2013.

  1. eddy400d

    eddy400d New Member

    Brakes are stoping thr thr car as it should but as it slows down until the car is almost to a stand still the brakes jerks and can be felt on the peddles. At that moment the brake peddle gets lighter as it felt like the ABS has been activated.

    Has anyone experience that or can help identify the issues cause it? Brake pads are good and we blled the brakes system few times already.
     
  2. gmbrezzo

    gmbrezzo Moderator

    Is there any vibration at lower speeds?
    At slow speed slowly apply the brake does it feel like is partially gripping?
    Is there any clunking noise.

    These are symptoms of warped or cracked rotors.

    It could be electrical, but someone with more knowledge will have to answer that.
     
  3. eddy400d

    eddy400d New Member

    nobody have the Same experience? hmm-,...
     
  4. bRACKET

    bRACKET Do Right Dean

    Get your rotors machined.
     
  5. tassuperkart

    tassuperkart Its a lie I tell you!

    At first glance Im with Bracket. Im thinking glazed rotors/pads and they are chattering when nearly stopped.

    E
     
  6. bRACKET

    bRACKET Do Right Dean

    I agree with Taz!
     
  7. Beavis

    Beavis Member

    Wheel nuts all done up?
     
  8. Bolts

    Bolts New Member

    Check for wear in you upper control arm.
     
  9. Martin Williams

    Martin Williams Well-Known Member

    Your rotors are warped, get them machined. About $50 a pair
     
  10. z-alot

    z-alot Member

    Did you bleed the 2 ABS bleed points within the cabin if you have them ? (according to manual)

    Also what happens if you hard brake (emergency brake) does the steering wheel jerk from side to side that can also confirm if its warp rotors..
     

Share This Page