What the freak is this>?

Camera didn't focus on the hose, but this is the passenger side near the steering arm. If you notice, there is one lonely hose left not connected to anything! should it be? or is it a drain line?

What throws me off is the fact that the other two hoses are connect to each other and one just left open ended, seems odd

 

Isn't that the wire from the Oil pressure sensor?

 

It feels like a vacuum hose, didnt think it had wires inside...ill go double check....

 

Where did ryzan say that it should have a wire "inside it"?
You are going to be asking one Hell of a lot more stupid questions, if you don't accurately read the answers you are given.:br:

 

eerrrm >> "It's simply there to stop the wire getting kinked and to give it some support. They are just taped beside the wire from factory. Nothing out of the usual."

So maybe you should accurately read posts?

And yes thank you Ryan, There are "wires" inside, and that tube does seem to be on the inside to give support, and its just split and poking out like seen in the pic....Cheers

 

Thanks mate,

Technically speaking there is the hose with the wire along side it like you say, which is "inside" another outer plastic wrap...This is why i used the term "inside"....Didnt know certain people where going to nit pick on words [TIS]

 

I still think the tube is for a drain and not there to stop kinks ect. If it was to stop kinks it would of been taped all the way but it always stops before the hose ends

 

yeah its hard to trace, a drain hose was my initial thoughts, then i thought vacuum hose!

 

Ezzups correct. Is a drain hose should the sender leak oil.

It exits like so to stop oil from tracking along the wiring and into somewhere it shouldn't.

For example. Pajero and discos have this oil tracking wire issue as the wires that control the injectors and other crap pass through the rocker covers... Oil enters its sheathing and finds its way at the ecu.

Nissans way of being proactive.

 

No thanks button? .....Thanks

 

Lol you been pressing it overtime have you haha. No worries. You can for non required preventative measures make sure it's clean. The tube. When I did an engine swap and worked it all out, the tube was blocked with road grime. I used some parts cleaner to clean it out. But it's really not required. Lol.

 

Today, I've only hit the thanks button twice lol... Sometimes if I only click once for the day that's it... The button disappears, or it's sometimes not there lol

 

Quote from ryzan....

"They are just taped beside the wire from factory."

It's my guess that your "Thanks" button has gone missing, along with your "Apology" button(or perhaps...you have just misplaced your glasses).
Probably due to your inability to figure out what all three items are for.:br:

 

Someone got up on the wrong side of the bed.

Whatever happened to 'If you've got nothing nice to say, don't say anything at all?'

 

Did i even ask for your opinion on my choice of words? why did you feel the need to say "Ryan didn't say anything about wires on the inside"...Who gives a flying Sh*t. Im soooo sorry i said inside instead of beside! im soooo sorry it emotionally upset you to the point ou felt the need to troll on my thread....

Happy?

 

un biased opinion here, but you are being the dick here.

 

This guy constantly has nothing but negativity to bring to this forum!