$3500 vg30dett with HKS 2540 turbos

Discussion in 'Car Parts for Sale or Wanted' started by pauly_adams, Dec 22, 2012.

  1. pauly_adams

    pauly_adams pauly

    hey guys i now have specs and pics etc of the turbo and engine, the turbos are HKS2540's has 480cc injectors, full hks piggy back engine management. the compression when last tested was 152psi on the left bank and 155psi on the right bank. the engine had over 350rwkw when it was in and stacks of torque (no i dont have a dyno sheet anymore i cannot find it). the engine blew know smoke nor is there any oil arount turbo outlet or intake manifold. it has had a 100k service and has been turned over every couple of months hand to keep it lubed. im chasing $3500 as i want a quick sale, was told the engine was fully forged but i cannot confirm without removing sump which i will not do.

    also i will not part out the engine[​IMG]
    [​IMG]
    [​IMG]
     
  2. pauly_adams

    pauly_adams pauly

  3. frysie

    frysie FRYTECH

    2540 or 2530's? there is a big difference between the 2.
     
  4. pauly_adams

    pauly_adams pauly

    they are 100% confirmed 2540's ball bearing turbos tags checked, have a little bit of shaft play but not majorly excessive or anything
     
  5. kawasakirider

    kawasakirider New Member

    Oh FFS. Why was this put up NOW? Lol.
     
  6. pauly_adams

    pauly_adams pauly

    i drove the thing once and that was enough for me, i was in 4th gear doing 60km/h tromped it and was sideways all up the street, the torque it produce was absolutly rediculous, ive driven big HP v8's big HP turbo cars and the thing just terrifyed me. i would ask more but im being realistic the price is cheap as i need it gone.
     
  7. ProckyZ89

    ProckyZ89 Senior Member

    Sounds like a steal ! Those turbos alone new are over $3000 and of that engine is forged than it could have been anywhere from $6500-15000 depending on work and parts
     
    Last edited: Dec 22, 2012
  8. pauly_adams

    pauly_adams pauly

    yes it is. [TIS]
     
  9. ZED_32_TT

    ZED_32_TT New Member

    hi mate, how many kms about? what internal works been done? and where are you in NSW?
     
  10. scottyoz1962

    scottyoz1962 Active Member

    Okay just want too clarify something, is this a VG30DETT or a VG30DET from a 300zx Z31 as is the car in the pictures ? because if it is just ONE Turbo then it is a vg30det motor.
     
  11. MikeZ32

    MikeZ32 das Über member

    it's a DETT

    DET does not have the Z32 plenum which this motor clearly has. scroll left and see the other photos.
     
  12. aurnob

    aurnob aurnob

    shouldve taken a vid. wouldve been entertaiing
     
  13. pauly_adams

    pauly_adams pauly

    yes it out of a z32 the engine is a vg30dett, as for the engine i would say it has any where from 15k km to 60k km as it was built at the z shop in 08, as for interals i cannot yet confirm until i get my inspection camera in the sump and exhaust, they way i look at it you get all HKS gear including HKS2540 turbos for $3500 and you get a free TT engine with great compresion. as for looking into it further the more i look into it the more ill want :) as originally i thought it just had garret T28,s. who knows it could well be a full HKS STROKER KIT IN THAT BLOCK ALSO, cams also look new and not standed
     
  14. pauly_adams

    pauly_adams pauly

Share This Page