stock IC's with t25?

Hey ya'll,
Asking if anyone has run stock intercoolers with a t25 and found it sufficient? I'll upgrade the IC soon enough, but for the mean time it'd be comforting to know. Not pushing past 10psi for the mean time.

 

M8, it wouldnt matter if you were using GT3540's or T51's.
AT 10 psi, your not asking much of the IC's
l8r
E

 

if you wanna upgrade your IC, i'd be looking at bigger side mounts as opposed to fmic - same result, you don't have to cut your bar and doesn't impede cooling to radiator.

-Kirill

 

dead right, dont bother

 

10 is only for a few days while I sort stuff out then once I get the gauge I'm after I'll happily go to 15. It's more of a how long can I piss fart around before I get into gear of changing the IC over.

 

Hang on a sec. Aren't the Stock Turbos T25s?

MoulaZX

 

I thought they were a T25/T2 hybrid. So you get a little bit quick spool.

 

yep
T25 compressor housing
+
T2 exhaust housing

 

Either way, the stock coolers will be fine.
L8r
E

 

My concern was that the pressure would be constricted since those little IC's are as big as my palm.

 

No issue with using the stock 'coolers but they will be a restriction. If you want more power you will have to upgrade them.

 

Up to about 320rwhp i would not see the need to upgrade