Left over items after the sale of my 300ZX - all very good items and quality

Hi all

As you may well know I've sold my 300ZX to downsize to a funky little Honda HRV mini SUV. (as seen in my avatar I still love my 300ZX's just downsizing for a few years. I'll still be on the forum every now and then.

Here are some items left over in my garage from the sale of my 300ZX.

These all suit a - TT - 5 Speed

Plenum gasket A4033-30P02 $10 + post
[/IMG]

6X Nissan/NGK spark plugs NGK PFR6B-11B $55 + post
Bought 2 sets from Z1 motorsports - 1 set is on the 300ZX when I replaced the plenum this is the spare for a future change. The set on the 300ZX work perfectly and are gapped for stock to 15psi.
[/IMG]

TT speedo cluster - 159852km $100 + post
(comes with the hood cluster piece for free)
[/IMG]

Targa bags and blinds $100 + post
In very good condition (there is a mark in the photo but it was just a dust mark and is now gone with a simple wipe over I just did not see it when I took the photo.. these are in great condition)
[/IMG]

TT - Manual - ECU $100 + post
[/IMG]
Close up of ECU numbers
[/IMG]


Balance tube - chromed and now with a 8mm Nozzel $150 + post
(8mm Nozzel installed by local Pertex). Cap the balance tube to use on an Auto or connect the clutch booster to the Nozzel fitting for a manual. A little dollop of silver paint on the nozzel attachment to blend in with the chrome. It's a brilliant fit because I had Pertex do it (cost $45 just for the fitting and work)
[/IMG]

Close up of the fitting
[/IMG]

3rd brake light - Infill style $120 +post
Has a hairline crack however worked perfectly and when the 2 halves are joined it's close to impossible to spot the join... literally close to impossible to spot it.
[/IMG]

Joined together
[/IMG]

Fuel control unit
[/IMG]
Close up of FCU
[/IMG]

Cup holder to suit DIN slot $10 + post
[/IMG]

No photos on these items..

TWD - Temperature warning display unit $50 + post

10 NEW Nissan stock front wheel lugs $20 + post

10 NEW Nissan rear stock wheel lugs $20 + post

2 NEW IAC/IAA (Idle air control) gaskets $10 + post

Box of tweed trim $10 + post
( not opened as I never used it)

Sump nut $10 posted to you

To avoid any confusion:

I'll take this as a first in best dressed by PM to me. This means your PM to me not your request on the posting is deemed first in. Certainly, post your interest so others can see how things are tracking.

I'll hold the items on a PM for NO longer than 5 days (unless you convince me other wise). I think that 5 days is sufficient to see funds appear. It is your responsibility to have and maintain a working PC and internet connection because I'll not accept excuses like PC not working or internet not working.
Cheers, Pete

 

PM sent re cup holder

 

If the cup holder is still available after MadDog and is a single din one then PM me your bank details and postage cost to 4810 queensland and I'll send you some cash.

 

Pm'd plenum gasket.

 

Also what's the gasket kit for the IAA unit? Full kit or just for mounting to plenum?

Cheers

 

Pics of the TWD?
If this is the whole unit and is in good condition I'll probably take it.

 

its a square black box lol :rofl:

 

Haha it's the whole unit though, everything I need?

 

Items pendimg as of 16th June 2011 & follow up

Hi all

As per the thread all items pending re PM to me.

Cupholder - MadDog
Plenum gasket - Arvin
TWD - Chilledpain

The IAA/IAC is for 2 gaskets only. I ordered 3 because I figured if I stuffed up the IAA/IAC work I had 2 more as backup.

Although, Chilledpain is pending on the TWD it is brand new in its package. I never got around to unpacking hence, installing it.

Cheers, all Pete
PS: on the bigger ticket items I'm open to negotiation on price (Via PM)

 

I'll send payment though on the TWD now

 

targa bags and shades. Send me a price including postage to qld 4306.

Cheers
Michael

 

PM sent. ECU
E

 

Ok... will do tomorrow when I go to the post office but also send me a PM please.

Cheers, Pete

 

dammit. il take the plenum gasket if it falls through.

 

Update

Cupholder - MadDog
Plenum gasket - Arvin
TWD - Chilledpain
ECU - Tassuperkart
Targa bags & Blinds - OZX_320

Just the gasket not sure about a kit being available. I ordered 3 gaskets used 1 gasket and had 2 gaskets backup in case I buggered up the first 1. I believe you need gaskets when removing the IAA unit for replacement or most likely just cleaning (As per the tech section thread on cleaning it)

Question re spark plugs, here is their specs:
Extra Long Life Double Platinum Plug, 14mm Thread Size, 19mm (3/4") Reach, 5/8" (16mm) Hex Size, Gasket Seat, Resistor, ISO Length, Wide Gap, Solid Terminal Nut, Projected Tip, Fine Point Platinum Center Electrode and Platinum Tip Laser Welded on Ground Electrode, .043" (1.1mm) Gap, Heat Range 6

Cheers, Pete

 

Update

UPDATE:

Items sold
Targa bags & blinds - Posted Fri 24th June 2011
TT ECU - Posted Fri 24th June 2011
Cup Holder - Posted Fri 24th June 2011
Plenum gasket - Posted Fri 24th June 2011
TWD - Posted Fri 24th June 2011


Pending items
Infill 3rd light - Pending payment (will post to new address )

Price drop items
TT Balance tube Chrome with Manual clutch booster nozzel or Auto without nozzel. $100 + post

TT Speedo cluster $50 + post

Make an offer on the remaining items

 

PM sent regarding Balance tube

 

Pm Sent Re Speedo

 

Remaining items Bargain $100 the lot posted

Hi all

The remaining items:$100 the lot posted

10 NEW Nissan OEM stock front wheel lugs + 10 NEW Nissan OEM rear stock wheel lugs + 2 NEW IAC/IAA (Idle air control) gaskets + Sump nut + Fuel control computer & 6X NEW Nissan/NGK TT sparkplugs

These are no good to be and are much better off in a 300ZX home because they will just gather dust in my Zedless garage

I'm going to bin the box of Trim because it's now 2 years old and rooted. If you want to pick through them add $5.00 postage to the above price and I'll include them if not I'll bin them.

Cheers, Pete