auto boost controller

Discussion in 'Non Technical' started by zenpython, Apr 7, 2011.

  1. zenpython

    zenpython Von Yorp

    have been looking around for a electronic boost controller what is the best one to get ?
     
  2. A-Bris-Z

    A-Bris-Z Carcraze

    Topic covered many times........use search to find your answer.
     
  3. SRB-2NV

    SRB-2NV #TEAMROB

    Turbosmart Eboost2 if you want the best, however something like a HKS EVC4 will suffice.
     
  4. Mclovin

    Mclovin Well-Known Member

    Turbosmart Eboost 2 Street edition is what I use.
     
  5. nick300zxtt

    nick300zxtt Member

    I'm about to fit the Eboost Street too. Will let you know how it goes.
     
  6. Vizard

    Vizard Active Member

    im using an hdi ebay one, works perfect on the drifter with bigger turbo @ 15 psi.
     
  7. Black Beauty

    Black Beauty New Member

    Does anyone have experience with the Blitz dual SBC?

    I am able to get one for about $250 - $300, which i've beel told is very cheap.

    Any opinions?

    Adam
     
  8. RBZ 260

    RBZ 260 Z nutcase

    Found Blitz bit annoying to set up. but once done its not bad unit. its easy to install and very small package.price i've seen on ebay from 120 to 300. Now with these and greddy ones there are cheap solenoid versions so take a note. the Dual SBC being the better one.

    HKS EVC3 is fairly simple to install and has some cool features overboost shut off and display changes to red when hitting the limits. if buying SH check that solenoid looks reasonable and not thrashed out.Very hard to find and replacement is exy. price SH $150-250

    EVC4 and PRO similar to above but with round knob. bit annoying using the knob but works cool. Pro has extra features and 3Bar capability. on evc4 no dual colour screen for warning as per evc3

    Greddy fairly simple to set up and use. also very small. can buy new from $350.

    APexi AVCR quite handfull to install (this is what i got in my TT now).as in handfull u got 7+ wires to hook up to the ECU (now im only talking electrical install as its assumed all other stuff is identical to all boost controllers) .
    most above u only need 12V and ground. i find it quick to setup (have it in my other car as well, so been around them for some time) Lots of features and u can fine tune it to your driving style.
    Spare parts are easily obtainable, solenoid and sensors.
    only thing i don't like with it is maybe tad large and doesn't have the overboost cut off like hks does. price SH 220 to 450. new 650+

    Turbosmart not sure never used it but sounds like a good unit may have to try it out.

    google instruction manuals for any of these and u can find out whats involved with install and setup.
     

Share This Page