VIC Getting rid of all my Z gear PART1, some free stuff

I'll take the drift pod filter with MAF adapter please. Can you PM me cost with post to 2170 NSW.

 

Can you add this to my order please? mine just broke!!

near new RHS pod housing (perfect cond) - $30
RHS pod cluster with blue leds - $30

 

Has the consult gone?

If the consult hasn't gonr then send me your banking details and I wll buy

 

So did the cash come through for the wide band? I still want it if not.

 

both conzult and wideband have been paid for sorry guys. Will update the list of what is left tonight

 

Turbos please

Turbos please

PM sent

 

Muhahaha. I think i'm more deserving than you tekky... My zed is running on wastegate pressure only... making max 7psi and in need of nistune tuning to get me into the 13s bracket. Running at NA speeds at the moment
Payment should have cleared today.

 

update

Free:
stock recirc valves 2 sets 1 STILL HERE
2 lower rad hoses
top rad hose
TT block needs rebore, 5 pistons + 6 rods, good crank, heads had valve damage on cyl no 2 but all valves, springs, lifters cams still there (not pictured)
hot dogs (can be replaced with the xpipe on exhaust system below)

stock pre cat exhaust and cats in good nick - $80
stock pre cat exhaust in good nick - $40
driveshaft with what looks like a recently replaced center bearing and good uni joints - $80
driveshaft with good unis needing a new center - $40
3" catback with a huge single trust cannon - $100
S/S Complete exhaust system with xpipie and near new redback cats - $400
rad fan with good clutch - $50
rad fan painted in girly red - $20
driveshaft shield - $5 each
twin intake with air filters (good for FMIC setups) - $80 SOLD
drift air filter with maf adapter - $20
4 bolt tuneagent split dumps with 1 near new o2 sensor - $120
good engine mounts - $80 pair SOLD
working FPCU - $50
working AUTO ECU - $40
wokring S1 PTU - $20
auto shifter complete assembly - $20
unifilter (airpod) housing with maf adapter (needs new foam filter) - $20
ignition control unit - $20
good auto trans mount - $20
guard and under front bar splash guards - $20
near new front engine cover - $60
fan shrouds lower - $20 each 1 SOLD
fan shroud upper - $40 each 1 SOLD
complete antenna assembly - $60
OEM flares - $10 each
drivers window switch - $20
pass window switch - $10
mirror switch - $10
rear wiper motor - $40
front bose speaker housing RHS - $10
cigarette lighter assembly in vgc - $10
front yellow side indicators - $15
near new RHS pod housing (perfect cond) - $30
RHS pod cluster with blue leds - $30
OEM throttle cover - $15
Throttle cover painted red with silver nissan font - $10
Auto Trans done 8000KM since re-build (new torque converter as part of rebuild) - $600
Manual conversion kit, includes everything pictured; gearbox, pedals, master + slave cylinders, clutch booster, used clutch + press plate, oem knob + boot, shifter - $1200
New 3rd brake light which arrived cracked - $40
Stripped Short block in very good nick, returned high comp across all cylinders was going to use this as base for a power build. Includes block, crank, pistons, rods, oil pump, sump, heads - $300 SOLD pending deposit
Turbos 2 pairs, 1 pair looks ok with minimal shaft play the other has seen better days, missing exhaust housing on 1 turbo - $80 the lot Good pair SOLD, bad pair now free come pick it up
OEM water pump, idlers, tensioner, crank sprocket, thermostat almost new done 8000KM - $200 SOLD
Polished rad pipes, missing 1 temp sensor - $100
2005 front Klippan belts, retract like new - $100 SOLD
2001 front + rear Klippan belts, retract like new - $150
OEM rear bose speaker boxes - $80 pair SOLD
front Indicators - $45 pair
fog lights in good nick - $60 pair SOLD
fog lights with missing/broken side plastic - $20 pair

socketed ECU, tested and fully working, no EPROM (missing some case screws) - $100 each
williem EPROM programmer, cables + software - $20
pocket romulator + cables and software. - $100 Had this running for about 3 years in my car with no problems http://secure.transtronics.com/osc/p...roducts_id/328
Brand new AEM 30-4100 wideband controller kit - $150 SOLD
Nistune license - $120
Conzult Full software + license + serial cable - $150 (not pictured) SOLD

 

Are NOT !!!

Gonna have a tantrum now

 

I've sent a msg and a follow up msg, can u reply pls?

 

I realise you haven't listed this item, but do you have a MAF.

 

of course i got a MAF pm sent

 

You have another complete TT shroud???

 

Hey mate,if ya still got th full twin exhaust,with the x pipes be interested
Give me a call,0457331017 cheers

 

pm sent regarding auto trans

 

Waitin for call in melb tday

 

update

Free:
stock recirc valves 2 sets 1 STILL HERE
2 lower rad hoses
top rad hose
hot dogs (can be replaced with the xpipe on exhaust system below)

stock pre cat exhaust and cats in good nick - $80
stock pre cat exhaust in good nick - $40
driveshaft with what looks like a recently replaced center bearing and good uni joints - $80
driveshaft with good unis needing a new center - $40
3" catback with a huge single trust cannon - $100
S/S Complete exhaust system with xpipie and near new redback cats - $400
rad fan with good clutch - $50
driveshaft shield - $5 each
drift air filter with maf adapter - $20
4 bolt tuneagent split dumps with 1 near new o2 sensor - $80
working FPCU - $50
working AUTO ECU - $40
auto shifter complete assembly - $20
unifilter (airpod) housing with maf adapter (needs new foam filter) - $10
ignition control unit - $20
good auto trans mount - $20
RHS wheel arch guard + LHS and RHS corner arch guards - $20
near new front engine cover - $60
drivers window switch - $20
pass window switch - $10
mirror switch - $10
rear wiper motor - $40
front bose speaker housing RHS - $10
cigarette lighter assembly in vgc - $10
front yellow side indicators - $10
OEM throttle cover - $15
Throttle cover painted red with silver nissan font - $10
Auto Trans done 8000KM since re-build (new torque converter as part of rebuild) - $600
Manual conversion kit, includes everything pictured; gearbox, pedals, master + slave cylinders, clutch booster, used clutch + press plate, oem knob + boot, shifter - $1000
Stripped Short block in very good nick, returned high comp across all cylinders was going to use this as base for a power build. Includes block, crank, pistons, rods, oil pump, sump, heads - $300
Polished rad pipes, missing 1 temp sensor - $80
2001 front + rear Klippan belts, retract like new - $150
front Indicators - $35 pair
fog lights with missing/broken side plastic - $20 pair

socketed ECU, tested and fully working, no EPROM (missing some case screws) - $100 each
williem EPROM programmer, cables + software - $20
pocket romulator + cables and software. - $80 Had this running for about 3 years in my car with no problems http://secure.transtronics.com/osc/p...roducts_id/328
Nistune license - $100

 

clear your inbox dude!!

 

sorry m8 hit me now

 

OEM throttle cover - $15
Throttle cover painted red with silver nissan font - $10


stock indicators in good nick - $15 pair
drivers window switch - $10
pass window switch - $10
mirror switch - $10
rear wiper motor - $30
front bose speaker housing RHS - $10
flares - SOLD
dash pod + housing - SOLD
antenna - SOLD


side splash guards $10 each
RHS wheel arch guard - $20


auto shifter complete assembly - $20
unifilter (airpod) housing with maf adapter (needs new foam filter) - $10
ignition control unit - $20
good auto trans mount - $20
front + rear wipers - $30 set


working FPCU - $50
working AUTO ECU - $40


4 bolt tuneagent split dumps with 1 near new o2 sensor - $80


drift air filter with maf adapter - $20


driveshaft shield - $5 each




driveshaft with what looks like a recently replaced center bearing and good uni joints - $60
driveshaft with good unis needing a new center - $30


stock pre cat exhaust in good nick - $40




2001 rear Klippan belts retract like new - $60
2001 front Klippan belts retract like new - $100
Polished rad pipes, missing 1 temp sensor - $80











Stripped Short block in very good nick, returned high comp across all cylinders was going to use this as base for a power build. Includes block, crank, pistons, rods, oil pump, sump, heads - $300




Manual conversion kit, includes everything pictured; gearbox, pedals, master + slave cylinders, clutch booster, used clutch + press plate, oem knob + boot, shifter - $850


socketed ECU, tested and fully working, no EPROM (missing some case screws) - $80 each


pocket romulator + cables and software. - $80 Had this running for about 3 years in my car with no problems http://secure.transtronics.com/osc/p...roducts_id/328


williem EPROM programmer, cables + software - $20


Nistune Full software license - $100