TT motor and other bits (Need some room)

Since the project has settled down I need to clear some room. Some items are free and some has potential market. Before I take them and pile in shed if someone interested with them feel free to contact me so that I can start a sale thread.

1. TT motor (no accessories, no turbos) overall good condition. no leak. number 6 cylnder has 125 compression (Cold). other cylinders are around145/155. I was running 13 psi boost. Good point is 100k service done 9k km ago. Receipt available. New water pump, timing belt, cooler hose, tensioner etc is already done. Inspection welcome. $700

2. Stock turbos with manifold. no oil or water lines. No leaks or shaft play.
Inspection welcome. $300
3. Stock intercooler pipes (You need them to do NA to TT conversion). $50.00
4. Two targa glass with locking mechanism (2 seater black) Free
5. Manual heavy duty clutch with stock flywheel. (40% life left). Unknown brand. Inspection welcome. $100
6. Two TT heads. Machine work has been done for bigger cam lobes (From my imported engine) Free
7. Short block bored already to 90mm. Couldn't use the block because I went smaller dia pistons. You can rebore 90.5mm if you have some plan to use bigger dia pistons. $200
8. Used Trust Greddy Grex piston set. Need new piston rings and conrods. Piston rings aren't availble anymore for these psitons.
($100)
9. Stock valves (Free)
10. Stock TT radiator (No leak) $80
11. Stock TT shocks (Fronts are good condition, rears has small leak) $80
12. Almost new gates timing belt and cometic head gasket 1.4mm. (Taken out from rebuilt engine) used for 8k km. $100 for both.
13. Stock tension rods with new nissan bush. $180 pair

More will be listed later. If there is any interest I can post pics. Offers welcome.

 

I want the Targas! Where do you live Kabir?

 

Mate, i received the pistons the other day, the photos you showed me failed to show the destroyed ring-lands on one piston so its F*ked, and they are 89 mm, not 90mm and rings are readily available although they are to be discontinued soon.
Thanks for the ashtrays and forged paperweights.

P.s If anyone is considering buying the block that these were removed from you'd better be buying it for a boat anchor or you'll probably come out disappointed, considering the condition of one of the pistons that were removed from it

 

Thats why I have sent you pics before you decide and mentioned you can't complain after you bought them. Check your PM. I have mentioned piston rings weren't availble anymore. I didn't measure them. They were 90mm which was told by engine builder. This is another reason why I prefer local pickup so buyer can check before buy anything and not get upset later on.