Items: Greddy Emanage Blue + Z32 Emanage Full Wiring Loom Location: Sunshine Coast Contact Details: PM me Item Condition: Near New, Been in the car for 6months no wear on ecu or loom. Price and Payment Conditions: $550 + Postage Extra Info: Greddy Emanage Blue ECU with modified R33 GTR emanage wiring loom. (At the time there were no off the shelf wiring looms for the Z32 on the emanage.) Working fine whilst hooked up to my 300 it is "untuned" there is no tune on the emanage. It was hooked up and was not altering any of the signals all is set to 0. Comes in box with metal tuning tab to turn the knobs on the ECU itself.
I had a Emanage Ultimate and it had cold idle and start problems when cold. Sounded mean, but didn't work so well This is only if the IACV is hooked up to work through the e-manage. It is fine to drive around though, and that's a good price. I would have paid $500 just for the adaptor harness, soldering in by hand was a massive PITA.
No Dramas Didn't have any dramas at all it idles the same as the standard ecu as when the emanage is piggy backed as well, can't tell the difference and yes the wiring loom is a pain it takes a while to get it right.
hi mate may be interested would this be suitable for a NA ? if so i may be back in the zed game in the next week(ish), i'll have a bit of money left over after i put on the kit so i may be interested.
I am not real sure about whether or not it work on an NA are the NA ecu's and turbo ecu's different pinouts? I'll have a bit of look to see if it would work.