Racers Edge garage clean out sale HHUUUGGGEEE

Hi all well its about time to offload some more of this accumulated stuff.

Your probably all wondering why its for sale and that is pretty simple. ZX2NV is being restored back to her former pre racing glory and her original self. Some of the gear is being kept and utilised on the new race car and some is not this stuff is listed on this thread so read on there are some bargains to be had.

Where to start mmmmm

How about with an E boost 2 immaculate condition rarely used black face $600 posted



PLX devices wideband 02 gauges x 2 $500 posted



EGT kit with 6 SS probes this is aerospace quality from the US can be programmed to scan for lowest or highest EGT reading or left to scan and show temps at a preset interval. Brand new never fitted $600 posted



Carbon fibre skinned bonnet complete with bonnet pins bolt on. Note has small hole for nitrous purge system $450 pickup preferred with this one




UAS Carbon grille grille only no OEM mounting gear $200 as per pic above

Dual 3 inch race exhaust with carbon fibre rear cannons. Full mandrel bent custom system for the 2+2 (not legal) no cats bolt onto Tune agent, Megan racing dump pipe sets $400



Full nitrous setup with 2 bottles, 2 stands, pressure actuated bottle heater, arming switches, purge system, intercooler spray system, dual blow down tube kits with bottle rupture valves (ANDRA requirement) fuel system T Peice with filter and gauge and a plethora of jets etc. For a TT buyer will also throw in the intake pipes as seen in the below engine pic complete with silicone joiners and T bolt clamps all lines are custom made earls gear to suit a 2+2 zed. $1700 cost nearly 3k







2 off brand new in the box Magnaflow street series 14861 mufflers $500 posted



Tein Flex coilovers complete with full EDFC system $1500
You can just see the EDFC unit in the centre console of this pic
and scroll above to the full engine bay pics to see the EDFC motors mounted on the coilovers no actual pics of the coilovers as they are in the car at present purchased new from Japan in July 2006



AP Racing monster front brake kit. 365mm race rotors extra thick with excellent cooling properties, 6 piston AP Racing calipers with dual carbon AP Racing pads. The whole kit can run continuosly at temps of up to 800 degrees celcius with no fade awesome brakes. The pads are not really good for street use a good mild street pad for this setup will cost around $300 and available from Specialised Brake and Clutch in NSW. Cost $4200 sell for $2800
Caliper pic


On car actual with 20's


18's



Enkei RP03 rims with or without tyres. Rims are 18x9.5 +38 tyres are Toyo R888 265F 285R which have done around 25 laps at wakefield in winter so heaps of tread left. Rims alone $1800 with Rubber $3000





ACL Race series pistons 40 thou oversize $700 brand new in box bargain

Might be a few more things pop up in the coming days or weeks so check back for updates.

Cheers

Jas

 

If the bonnet was in melbourne i'd take it

 

Willing to trade for other Z related items that would be suitable for either ZX2NV or ZX2NV2 so if you think you have something and want something here post here or PM me.
The only thing ZX2NV really needs is turbos at the moment 4 or 5 bolt am easy

 

Ha ha road trip

 

Hehe well i've got a turbo kit which i'm looking to offload for bigger ones.

 

What kit did you buy I can trade some Pistons they may seem familiar though

 

lol

Its the 2860RS kit with .64 A/R

I'm trying to chase up pricing now for the 2871's

 

Thats a bugger I think the 71's were only around 300 bucks more from memory I would have to drag out the old GB thread to be sure

 

Yer they werent much more hence i'm kicking myself now. But hey dems the breaks. If your interested i've got the turbo's listed on the for sale section.

 

Dibs

on the Teins. Will shoot you a PM mate.

 

What do you mean carbon fibre skinned? As in it's a fibreglass bonnet with carbon veneered on the surface? Or is it a fully carbon fibre bonnet?

shall see tomorrow afternoon if I can afford such luxury...

 

What size in for the Magnaflows?

Cheers
Mark

 

Yep carbon fibre skinned fibreglass frame bonnet

2.5 inch OD pipe. They quote 2.25 inch on the website but thats ID or inside diameter we locally measure typically in OD

 

Can I have one wideband? Don't really need both... Do these have an output fot datalogging or ECU?

 

Here is the link with the download it does have a 0-5v analogue output.

WIDEBAND INFO

Will let you know if I decide to separate them, they are however more accurate measuring off each bank rather than a combined or 1 side measure especially on a zed. Dont know how thye would adapt to the VH45 will think about that one a bit more

 

not happy jas...i just spent 2250 on a setup of these *crying*

 

Sorry Eric I have been thinking about it for a while now but needed a new goal before I made the hard decision so now its full steam ahead lol

 

I'll do some digging and let you know tonight or tomorrow morning.

 

all good mate, all good

 

PM SENT

n/m

Consider you know what sold pending answering my 2nd PM.