What i am selling is a complete brand new unused VG30 Package. I have changed my mind about selling this about 12 times in the last 12 months. It was originally built to go into a RX7, then it was going into a 1200 ute. Both cars have been sold and the longer i leave this sitting here on the engine stand the more chance i have of buying another car to make a home for it. I have 3 cars on the go currently so i don't particularly need another. I would love for someone to put it in a car with a GTX42R, feed it 40psi and see what it can do. In design these motors poo poo all over the RB series and i just want to see it in action. I'm selling this package as a Hamburger with the lot. i have very little interest in parting items out one by one, the price is that good you would be able to considerably offset the purchase price by selling parts that you don't need or want. VG30DET with ALL of the good fruit. Built by Westend Performance Sydney Bottom end: block test, deck, square, torque hone, line bore, debur, balanced, assembled etc. Carrillo rods - carr bolts CP custom spec pistons, pin upgrade, totalseal rings - CR 9:1 L19 head and main studs clevite bearings counterweight welded modified oil pump Modified sump and pickup Up top: Tomei head gaskets Jun 272cams Jun adjustable cam gears Ferrea Ti retainers/locaters/locks and double springs Ferra intake and exhaust valves - oversize Head ported and flowed Gates kevlar belt, new tensioners new gates waterpump New custom ross balancer for 1 x 4pk accesory belt(water and alt) and crank trigger setup Certainly more that i have forgotten but that is the critical bits. Everything is there its a complete motor built with the best of everything, no expensive spared. The engine was built to support well over 1000hp. Plumb it up and hit the key and have the most powerful VG in Oz. But wait there's more! EXTRAS! Autronic SM4 + Loom + Vnet cable - NEW M&W pro-16c + Loom + pins + Coils - NEW 6 X New CP pistons (because you need spares) - NEW 6 X Aries pistons (because you need spares) - NEW 6 X Scat rods (because you need spares) - NEW 6 x Bosch 2000cc injctors - NEW Fuel rails Inlet manifold with plazmaman 90mm throttle body Alternator Pullies SFI rated billet flex plate Spragless Torque converter to suit, Turbo spine input Bellhousing Machined and custom made adapter to suit TH400 (easy enough to do a PG one if you like) + assorted gaskets, flanges for it. It's not a small amount of money, but to the right buyer this is a stupidly cheap price. I'm willing to accept a reasonable deposit and hold it for a while. I'm not expecting it to sell immediately and i'm in no rush. It will go on ebay eventually but i'm really not looking forward to dealing with the crowd that brings. Any questions or inspections are welcome, i'm more than happy to strip the motor in front of you, so you can be sure you are getting what you are paying for. i can arrange delivery for you Australia wide, pick up is available in Canberra and i also travel to Sydney regularly and can happily drop it off. PRICE - $10,000 As i don't get on here often, if you would like to discuss things further, please call me during regular business hours. Zero four zero eight 200 941 Cheers, Dim
God damn that would have saved me a lot of money. Mine is getting assembled at the shop ad we speak with pretty much the same specs list. Sell me the crank pulley and trigger set up? Or if not, pics of how you did it?
I still have this engine available. I have had alot of tyre kickers (no real surprise) but no takers. It's going up on eBay now. Cheers, Dim
Plenty of room, same fab as any non oem engine transplant. F**k, it ticks all the boxes and massive time factor saved as well. It's ready to drop in, even if you replaced the intake and ran stock with some decent blowers it'd be a cheap way to get a top spec motor. I'd snap it up if I was in the country, I plan to build another zed when I get home. Nostalgia's sake and all that.
Strong built. Yes it seems like a lot of money but anyway thinking of building one should seriously consider this as it will save you thousands in the long run. Good luck with the sale. *Do it Andy
This is literally years away before I come back, or if the dollar gets into the 80's again...whichever comes first.
Won't last, the fed reserve will adjust their easing policy and reserve bank will start jawboning the AUD again. It'll play 70-75 for a while yet. It's just a bit of (to me unfortunate, to you fortunate) coincidence that the Aussie job data, china's bluff on growth, sharp rise on commodities and the poor numbers out of the US made folk run back to the Aussie, but 3 out of 4 of those will turn.
