Call out to people with safc and dual afms. I have wired it all up and car won't start. I have checked all wiring and all good. It doesn't idle but when i hold the accelerator down the car stays on. When car is off with ignition on AFM 1 voltage - 0.40V AFM 2 voltage - 0.35V SAFC setting Sens. No - IN 2 OUT 2 Sens. Cal. - IN 2 OUT ADD Here is the strange one. The AFM voltage on my ECU talk when car off with ignition says 0.6V? Is this correct? Anyone else with the same setup, can you check what your ECUtalk gives you for AFM voltage when car is off? Thanks Mike
I have a SAFC Neo with dual AFM, I had a quick look at my readings today: IGN on / Engine off - 0.40 + 0.44 = 0.6 Engine @ Idle - 1.15 + 0.95 = 1.3 (Cold so approx 900rpm) My Settings are also In 2 - Out 2 - Add So looks fairly normal to me, possibly a dud AFM or incorrect connections? Or Boost leak?
