QLD wrecking 1991 2.0 300zx NA MT Red (AG2) No engine or gearbox

Discussion in 'For Sale - Z Related' started by FireHorse, May 21, 2017.

  1. FireHorse

    FireHorse Member

    Messages:
    280
    Likes Received:
    11
    Trophy Points:
    18
    Location:
    Ipswich
    NA Subframe complete with diff $250
    NA brake booster $50
    NA PS res $30
    Tail lights and center panel $100 (can separate)
    stock z32 rims with shagged tyres $80
    2.0 doors complete with door cards and all electrics, mirrors and glass (Red AG2 - paint clear peeling) $200
    2.0 hatch some rust spots good for glass only $50
    2.0 rear 1/4 glass set $125
    2.0 Targas $60
    Drivers side fender clear peeling $20
    NA K-frame with complete steering rack $100
    Passenger seat good condition, could do with a clean $30
    NA instrument cluster 151,xxx $30
    Left hand NA instrument control pod holder $10
    2.0 Boot Carpet $30
    series 1 instrument pods, missing demister and hazzard, pair $30
    Fibre glass custom vented bonnet (black) with bonnet pins holes $60
    Complete NA Brake setup inc rotors, calipers etc $80
    NA Shockies full set, unknown brand, nice and firm, stock height (or slightly less) $120
    NA Rad shround good condition, complete $50
    NA Radiator hoses $15
    NA 2.0 auto 2 piece drive shaft with new center bearing $80
    Stock NA throttle cable cover $20
    Ash tray cover VGC $40
    plenty of interior panels, some scuffs, nothing deep, good for vinyl spray

    bonnet1.jpg
     

    Attached Files:

    Last edited: May 21, 2017
  2. FireHorse

    FireHorse Member

    Messages:
    280
    Likes Received:
    11
    Trophy Points:
    18
    Location:
    Ipswich
    Bonnet Sold Pending payment
     
  3. voodoo2

    voodoo2 New Member

    Messages:
    6
    Likes Received:
    0
    Trophy Points:
    0
    Hi do you have the windscreen
    cowls
     
  4. FireHorse

    FireHorse Member

    Messages:
    280
    Likes Received:
    11
    Trophy Points:
    18
    Location:
    Ipswich
    Sorry no, the passenger one was gone when the car arrived and the drivers side is fairly average
     
  5. Boorkus

    Boorkus Member

    Messages:
    49
    Likes Received:
    2
    Trophy Points:
    8
    Upper control arm bolts

    Would you have the bolts/bracket that goes through the side of the engine bay and provides the studs for the front upper control arm bracket to bolt to?

    (this thing: http://i.imgur.com/WPWcwy0.jpg)

    I would need upper and lower for driver's side please :)
     
  6. FireHorse

    FireHorse Member

    Messages:
    280
    Likes Received:
    11
    Trophy Points:
    18
    Location:
    Ipswich
    pretty sure I have them yes, for the upper camber arms. Also i dont think they are specific to 2+0 and 2+2

    I will check on Friday and message you
     
  7. Boorkus

    Boorkus Member

    Messages:
    49
    Likes Received:
    2
    Trophy Points:
    8
    Thanks heaps, lemme know once you know.
    If it comes with the nuts too, that'd be awesome (rounded off two of the nuts yesterday, still fuming lol. They don't wanna come off easy)
     
  8. Boorkus

    Boorkus Member

    Messages:
    49
    Likes Received:
    2
    Trophy Points:
    8
    FUCA Bracket bolts not needed

    hey mate, sorry to waste your time but I won't be needing the FUCA bracket bolts anymore - I managed to get the nuts off the damn thing today without resorting to destruction.

    Thanks heaps anyway
     
  9. FireHorse

    FireHorse Member

    Messages:
    280
    Likes Received:
    11
    Trophy Points:
    18
    Location:
    Ipswich
    no worries Boorkus

    Drivers side windscreen cowl, great condition $20
     

    Attached Files:

  10. badxtc

    badxtc kirby's bitch

    Messages:
    4,795
    Likes Received:
    22
    Trophy Points:
    38
    Hey mate do you have the clutch pedal and the clutch master cylinder. The complete system please. Need delivery to melb as well .
    Cheers alex
     
  11. MIKEA

    MIKEA Member

    Messages:
    281
    Likes Received:
    1
    Trophy Points:
    18
    need 1991 300zx (2+0) windshield washer pump seals etc.
    Do you have still have the washer pumps, seals etc for sale?
    This is the one that fits in the both behind the passengers rear wheel arch. May take the lot if they still work and no leaks
     
  12. FireHorse

    FireHorse Member

    Messages:
    280
    Likes Received:
    11
    Trophy Points:
    18
    Location:
    Ipswich
    Its possible the rear one may have suffered damage from the accident, I will check and PM you.

    Just the seals? what do they look like?


     
  13. MIKEA

    MIKEA Member

    Messages:
    281
    Likes Received:
    1
    Trophy Points:
    18
    Sorry need the whole motors and any connecting pipes. The seals are inside the motors which cannot be taken apart, of you were rear end in a crash then there is a possibility the motors maybe stuffed. I want ones that work and don't leak. thanks
     
  14. WLDTTZ

    WLDTTZ URBAN LEGEND

    Messages:
    3,871
    Likes Received:
    4
    Trophy Points:
    38
    Hey mate how much for the brake booster check valve posted to S.A ?

    [​IMG]

    Cheers
     
  15. B-Line

    B-Line Older junior member

    Messages:
    132
    Likes Received:
    1
    Trophy Points:
    18
    I know its a long shot but are the shockies still available?
     
  16. FireHorse

    FireHorse Member

    Messages:
    280
    Likes Received:
    11
    Trophy Points:
    18
    Location:
    Ipswich
    those ones are gone but I think I have an old set of stockies floating around
     
  17. B-Line

    B-Line Older junior member

    Messages:
    132
    Likes Received:
    1
    Trophy Points:
    18
    Pk what condition and price?,'
     
  18. FireHorse

    FireHorse Member

    Messages:
    280
    Likes Received:
    11
    Trophy Points:
    18
    Location:
    Ipswich
    sent you a message
     

Share This Page