WA Part Out

Discussion in 'For Sale - Z Related' started by WazTTed, Dec 18, 2017.

  1. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    So ive blown my engine up at the drags, looks like detonation, time has come to part her out as i dont have the time and money to rebuild her back to way she was.

    I have alot more stuff aswell, i am reachable via text 0422974090 , pm or pop in for a gander at my goodies car is located in Leeming WA (just off farrington Rd fwy exit)
    would prefer to sell the large stuff (turbos exhaust etc ) to a local buyer so they can inspect :)

    i have alot more zed stuff not listed, prices are negotiable but im not going to give this stuff away !!
    if your chasing anything just ask , most of my gear is new, purchased from coz, z1, pzp, or specialty Z

    more pictures available on request. most parts are still installed in car aswell .


    Grex Rods x6 RRP 2200 $800

    [​IMG]

    Head and Cam combo,

    heads with unknown Lift and duration Cams with cam gears and heavy duty valve springs, bronze valve guides will need 20 tho off as there is a small amount of my vaporized piston in the combustion area
    heads have been clearanced to fit cams in cam gears are Tomei fully adjustable units $800

    [​IMG]
    [​IMG]
    [​IMG]

    Nismo 740 injectors in series 1 Rail with Jwt adaptor kit , flow tested and cleaned by PennyArvs $800
    [​IMG]


    Msp Manifolds (currently disscontinued paid $1199 )$700
    [​IMG]


    SZ 3" expansion pipes version 1 $400 (pic when they were new)
    [​IMG]


    custom 3" exhaust includes Uas centre muffler ($250) and 3"magnaflow mufflers 14835 (290 each new) 2 ballistic flow 100 cpsi (230 each new) has a couple pin holes in piping that should be tacked up no big deal tho, (1290 just for parts before custom piping) this is extremely nice exhaust designed to be as high as possible and mates up to SZ 3" dumps $800

    [​IMG]

    Rebuilt Hks 2530 turbos with upgraded Forge 18 psi Actuators , bearing packs Cryogenically treated, stainless fitting kit with correct size restrictors, very small wear on one of the wheel tips the other one perfect . both spin as new very minimal shaft play they have only been used for 9000 kms, boosted to 18psi twice !!, new kit costs 6000 from hks , acutators were 450

    $2500 new kit costs 6000 from hks , acutators were 450
    [​IMG]



    reciepts included for rebuild from grant at Per4manz

    Microtech Lt12S with hand controller and laptop dongle and laptop software and Upgraded 30 Psi map sensor $800
    [​IMG]


    Whiteline front and rear sway bars including links $450

    2.5" CZP steel intercooler piping $250

    58MM billet throttle bodys and plenum matched to suit $350
    [​IMG]



    Rebuilt Diff all new bearings and seals with Richmond Leader Gears 4.11 with subframe with black ES poly bushings installed. $1000 or 900 for diff itself

    1 Piece steel Drive shaft balanced perfectly no vibration issues $250

    Maltech ADR aproved Stainless brake lines $200

    R33 GTR Brembo Calipers with Dba slotted 324mm rotors Very good condition $1000;
    [​IMG]

    Hks Dli (disscontinued) RRP 450 , $300

    Spl fender braces (disscontinued) $300
    [​IMG]


    Uas front and rear Strut Braces $200

    Ash Spec V1 Massives 2.5" includes ducts and fog lights to suit $ 550
    pics when new and fitted
    [​IMG]
    [​IMG]



    New Starter from rob260 group buy 10000kms use $200
    [​IMG]

    Custom interior, seats and door cards professionally re trimmed, doors recently completed proffesionally $1000
    [​IMG]



    new idle controller rrp 340USD $200

    New engine mounts 9000kms use $125

    brand new sump 9000kms use $150
    [​IMG]

    used new Nismo fpr 80

    used new oem fuel dampner 80

    greddy profec B boost controller $250

    series 1 head lights with genuine 2K inserts installed purchased from yahoo japan, $700
    [​IMG]


    [​IMG]

    TT new clutch master, slave and uas 1 piece line with heat proof lining 100

    Vented nose panel $50

    Rare Mines 300 Speedo with gauge rings $200

    Series 2 AC controls with amplifier $100
     
  2. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    interior,
    starter,
    clutch line master combo
    diff/subframe sold pending pickup
     
  3. rob260

    rob260 Moderator Staff Member

    Messages:
    14,651
    Likes Received:
    148
    Trophy Points:
    63
    Location:
    Sydney (North)
    Keen assuming control pod is in good shape?
     
  4. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    more pics of custom exhaust [​IMG]
    [​IMG]
    [​IMG]
     
  5. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    system is true 3" with 3" magnaflow 14835 3" inlet 4" outlet mufflers ,
     
  6. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    Ash Spec massive intercoolers 2.5 with CZP piping kit, includes ducts, fog lights modded to suit and recircs clocked for install. includes silicon and hard pipes for the final transition to the throttle bodys $750 together piping and intercoolers.
    [​IMG]
    [​IMG]

    microtech Ecu includes plug and play adaptor 30 psi upgraded map sensor, ill throw in a set of air filters and pipes that work nicely with the stock intake pipes.. also includes software and controller..
    works very well, cold start fine, Ac idle up fine its no fancy haltech but it does the job very well and very easy to find a tuner that is comfortable with them !! purchased from UAS
    $800 ono
    [​IMG]

    HKS DLI version 2 these improve your spark not only at high rpm but will stabalise your idle considerably.
    $300
    [​IMG]

    lights are pulled ready to go if anyone interested
    [​IMG]
    [​IMG]

    new centre console , includes new knob aswell 5 months wear on it from new $40
    [​IMG]
     
  7. mark

    mark mark

    Messages:
    184
    Likes Received:
    0
    Trophy Points:
    16
    I’ll take the Center console and shift knob and would you take $100 for the sump, cheers
     
  8. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    Drive shaft is a z1 2+2 manual turbo model
     
  9. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    Console and knob sold
    Microtech sold
     
  10. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    Profec B spec 2 now includes Radio cluster mounted ready for install :) $250
    [​IMG]

    brand new Engine cover used for 2 months as new condition $100
    [​IMG]
    [​IMG]

    Stillen style nose panel, holes cut out so its functional, rear of panel needs stock finished and seals
    $50
    [​IMG]
    [​IMG]

    56mm Asi radiator includes New Nissan oem 1.2 bar cap $100
    [​IMG]
    [​IMG]
     
  11. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    series 2 Ac controls and amp, works great
    one of the lower mounting holes is cracked has been glued back together still works fine. $100
    [​IMG]
    [​IMG]
     
  12. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    Nismo injectors still available, installed in Jwt "INJECTOR TO EARLY FUEL RAIL ADAPTER KIT RRP $130US"
    nismo injectors on sale at coz 749USD = 971AUD!!
    link to adaptor Kit
    http://www.jimwolftechnology.com/customer_part_detail.asp?PartID=517


    $800 9000kms use Very Good condition plug and play
    flow tested and cleaned by pennyarvs with no issue


    [​IMG]
     
  13. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    HOHOHO buy your zed something nice for christmas !! 6x Greddy Forged connecting rods
    RRP 2,623 00 USD !!

    $800 they are in perfect condition !

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  14. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    pic of rod vs standard one [​IMG]
     
  15. humpa

    humpa Member

    Messages:
    33
    Likes Received:
    2
    Trophy Points:
    8
    Is the Series 2 AC control with amplifier still available?
     
  16. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    Still have the series 2 ac controls and amp available !! Tested and works perfect
     
  17. humpa

    humpa Member

    Messages:
    33
    Likes Received:
    2
    Trophy Points:
    8
    So I should be able to swap out my S1 system and it will work?
     
  18. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    custom exhaust , small hole has been patched, ready to go!! someone come take it !!
    $ 600 cash
     
  19. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    Greddy Profec B spec 2 Boost controller available, $250 includes all wiring and solenoid for install

    R33 Gtr Brembos , 324mm DBA slotted rotors (practically new), good pads 10mm meat left $1000
    these are a direct bolt on , no adaptors needed, just need to bend the brake shields back
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
  20. WazTTed

    WazTTed Grease Monkey

    Messages:
    7,105
    Likes Received:
    50
    Trophy Points:
    48
    specialty z dumps 3" 5 bolt ready to go
    $400

    [​IMG]
    [​IMG]
     

Share This Page