I have just downloaded ZTALK ver 1.1 and noticed that the right O2 sensor is stable at 33% but the left varies.. Is this normal for ztalk or is there a problem with my O2 sensor
02's are supposed to change with rev increase/decrease but to check whether it's a ZTalk (which is buggy) try using Freeware Conzult Right Click Me and Save As ...
Ztalk is buggy, but when it dies, it usually locks up everything as Zed4life says, try Conzult free, but I'd reckon you've got a dud o2 sensor.
I used Conzult freeware, but it only shows 1 o2 sensor, where Ztalk shows 2. I know you are supposed to switch sensors going direct on the ecu when you the blinking light..
Dead O2 sensor By checking directly on the ECU using the self diagnostics, I found the right O2 sensor isnt working, hence this is why is runs a little rough when idling and normal cruising..
Found the problem It's great to get help from this computer of mine. The wife won't listen to me. I love you, computer. Anyway, enough of the soapies...IT"S FIXED.. It was a stretched black wire from the sensor. I patched the wire and, presto, it works. Happy little Vegimite (TM) now.....Thanks all, (and Computer) for your help...
Ztalk 'bugs' appear voltage-related >>> >>> it works with some Zeds/some PC's sometimes ok. Try turning headlights ON for several minutes before initiating Ztalk as this helps stabilise the voltage & therefore the software.
