Anybody want a licensed Z31 with a stuffed motor? (probally hydro locked) White Inside is almost grandpa spec and very little rust on the outside. 4 Near new tyres Plates due back end of the month so if you have a motor to put in it, it'll be ready for cruising as soon as its paid. $500
No pics, couldnt get camera sorted before goging back to site. I come back to Perth on the 22nd and will tell the Mrs to just renew to rego and if its not gone the week I get back Ill just hand the plates in. However the price is going up to cover the rego because I didnt want to pay for it in the first place.
If you leave it NA it should bolt right in all the mounts are the same and the harness is identical too. Just need to put a vg30 sump on and take the torque converter off to make the back of the motor manual ready.(Actually you will need to put a vg30 crank in so you have the right holes for the flywheel) If you turbo it all the vg30et stuff bolts on, you will need the ecu, sump, oil pickup, injectors and if you want put the cams from the vg30 in it so your not running ones setup for a 4wd.