WRECKING 5 SP TT 2 SEATER SYDNEY

Discussion in 'Car Parts for Sale or Wanted' started by ross, Oct 31, 2006.

  1. ross

    ross Member

    I'm wrecking a 300tt 5 speed 2 seater .
    I'm keeping the diff , speedo, computer, cruise control, AFM ,PTU, exhaust.
    The car came from tassie it use to be simoz's car if you search you will find his post about damage RF and RR pannel.

    Engine $2500 ono see running in car , on cold start up left exhaust little smoke then cleared unable to drive at speed ,no flywheel or clutch.
    would concider tradein off old engine.

    5 speed conversion kit complete as in car , i'm told its notchy 4th to 5th $2000 ono. aviable after engine sold so to let engine buyer to see it running.

    pm or post enquires , i'm not near a computer through the day so replys will be in the evening

    thanks ross
     
  2. Z-Force

    Z-Force SHIFT_Charizma

    After a few things...

    Hey mate,

    A few things I'm after...

    - Electric seat controls.
    - Drivers side Fog lamp.
    - Targa/Roof/Winscreen trims if they aren't weathered.
    - Passengers side Windscreen cowl. (Plastic bit that sits over the battery on the windscreen. If it's undamaged.

    Hope you can help. :)

    Cheers
    Rob.
     
  3. Waz

    Waz Member

    Rob,

    I am after the air con condenser and belts please.

    Waz
     
  4. carzone

    carzone in the corner crying!

    Hi there,

    I would also be interested in a few things too. I'd proberly come pick the items myself along with the radiator :p :D .

    Anyhow down to the point, Im after the following.

    - The passenger side splash guards that run in the wheel well under the 1/4 panel.
    - The cover the protects the engine from underneath, it has like a little velcro thing and it protects the sump and the big lower radiator hose etc from debris etc.
    - Driver side door trim if its in good nick.
    - Power window swiches both driver's and passenger
    - Lastly an electric drivers seat, needs to be working and the seat itself in good nick, no damages.

    I think thats all about that does it for now.

    Thanks mate,

    Pete

     
    Last edited: Nov 1, 2006
  5. Woody

    Woody New Member

    Parts

    Hi,

    Just wondering if you have this part from the mirror
    Its the metal shafty thingo that part of the mirror assembly i have a pic of what mine looks like (somone hit my mirror :S)

    How much do you want for the part?

    [​IMG]
     
  6. ross

    ross Member

    replys

    PM's sent to all above thanks
     
  7. weponzx

    weponzx New Member

    Parts

    You wouldn't happen to have the two plastic bits that cover the screws on on the upper part of the radio/vent cowl would you??
     
  8. Wizard

    Wizard Kerb side Prophet

    Pm sent

    .:D
     
  9. ross

    ross Member

    replys

    PM's sent for replys above
     
  10. AussiePhoto

    AussiePhoto New Member

    I'm after the clip and its screw that holds the left hand sun visor in position if you have one
     
  11. ross

    ross Member

    replys

    replys to pm's sent
     
  12. 300aj

    300aj Only one in Canberra

    Part wanted

    Hi there, I'm after one interior part the Stereo Centre Panel.....just wanna see what the quality like and how much to post to ACT
    Cheers
    300aj

     
  13. fish

    fish N/A 1990

    clutch Hard pipe

    Hi iam after the hard pipe that runs from the bottom of clutch reservoir down towards the slave cylinder. hope you can help cheers FISH:zlove:
     
  14. ross

    ross Member

    hard pipe

    all manual related parts are going together with coversion.
    might i suggest that you go to a motor sport hose maker and get a steel braded hose made from top to bottom , don't use rubber as it expands and you may losse slave cylinder movement distants .
    Motor sport conections at seven hills in sydney should be able to help and there open on saturdays just off the end off the M2
     
    Last edited: Nov 24, 2006
  15. fish

    fish N/A 1990

    hard pipe

    Ok ill tke a look at that thanks for tip cheers FISH:)
     
  16. fish

    fish N/A 1990

    hard pipe

    Ok ill take a look at that thanks for the tip cheers FISH:)
     
  17. BuzZED

    BuzZED New Member

    Dash Board

    id be interested in the dash board if you have it and its in good nick ie no sun damage cracks or lifting vinyl. can anyone confirm if a 2 seater dash will fit a 2+2?? i can pick up from sydney. thanks
     
  18. daz07

    daz07 Daz

  19. ross

    ross Member

    pm's sent for the above thanks

    .
     
  20. ZX2NV

    ZX2NV Z Racing Evolution

    I have dibs on the bare front cut cradle assembly and mounts too if available as per PM and discussions.

    Just thought I would add another to my post count hey Ross:D
     

Share This Page