What have you done to your zed today? Part 2............

Discussion in 'Non Technical' started by Jinxed, Jan 22, 2013.

Thread Status:
Not open for further replies.
  1. Sanouske

    Sanouske Retired Moderator

    Side note when I'm done the zed I can do your front bar if you're interested...
     
  2. kawasakirider

    kawasakirider New Member

    Serviced the car

    Bought new rims

    Grinded/sanded the rash off the rims and polished them

    Basically that's it :)
     
  3. ZX_DORIFT

    ZX_DORIFT ENGINEER

  4. Anti

    Anti 14.7 x 14.7 = 44.1

    what's it worth?
     
  5. rob260

    rob260 Administrator Staff Member

    Fitted powertrix sway bar end links.

    Finished fitting SZ inlet and outlet pipes.
     
  6. kawasakirider

    kawasakirider New Member

    Fished out the injector connector clip from underneath the plenum and refitted it :p
     
  7. Ns-Zed

    Ns-Zed Member

    I might have to start a build thread...

    last night I fitted

    1. HP envy's, 19x10 (265/30) rear, 19x8.5 (245/35) fronts
    2. Boomex Skirts
    3. Kaminari rear bar (needs the rear tow hooks removed to fit up property, looking for a work around here though.

    Adding to my 2000 spec front bar, I have almost achieved what I want out of the looks of the car. Just bonnett shopping at present - well I have one in mind.

    Now I need:
    1. side mirror covers from the Z Shop so I can shave the front fender indicators.
    2. mufflers to match the kaminari bar.

    I can then start preparing the car for a re-spray in a couple of months time.

    no photos yet, but will get some up soon.
     
  8. ZOE NZX300

    ZOE NZX300 zoe nzx300

    Designed and fitted new dip stick

    [​IMG]

    Extendable dip stick for easy access through strut brace bracket.

    [​IMG]
    [​IMG]
    [​IMG]
     
  9. Mr G

    Mr G Active Member

    That looks very neat - nice job!!!

    [​IMG]
     
  10. kawasakirider

    kawasakirider New Member

    Fitted silicone intake pipes.
     
  11. zedboy

    zedboy Active Member

    Looks very detailed Joe, well done.
     
  12. black baz

    black baz black 'n blue Bazemy

    beatutiful, Joe ... as is every element of your magnificent machine.
     
  13. Zedback

    Zedback Member

    Unusual wheels + semi slicks

    Just fitted these wheels and 595RSR's, thought they might be unusual enough to warrant sharing. Will be trying them out in anger at a khanacross this weekend.
    Before: Avanti 17x8's with old hard 245s...
    [​IMG]

    After: Suzuki R (?) 18x8.5 & 18x 9.5 with 255s on the front and 285s on the rear... [​IMG]
    Please excuse the ride height, the 285/30s are a little short and I'm still running stock springs.

    [​IMG]

    Rears needed a +20mm flare.
    [​IMG]

    Not sure what the wheels are and one of the guys at the tyre shop who says he knows jap wheels had never seen anything like them before. Anyone know what they are?
     
  14. Sanouske

    Sanouske Retired Moderator

    They are ridiculous rims.... No idea what they are.

    They're that strange that then work. Haha. Not for preference and style but for dedicated track/car park rims. Lol.

    Where you buys them from..
     
  15. frysie

    frysie FRYTECH

    looks like someone smashed old rims and glued/welded them onto some base rims and made a weird mix of 2 rims >_>... they make my eyes go blurry just looking at it.
     
  16. Sanouske

    Sanouske Retired Moderator

    A bit from yesterday arvo.

    [​IMG]

    [​IMG]

    Then a little more from today.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Then I ran out of primer. And it was due to rain. So I cleaned up, recovered the zed in its water proof blanket, then proceeded to drive the 100 odd km round trip to pick up more primer...and sandpaper, new measure jug, 1L more of clear, masking tape........ Primer.

    Now to go back and final sand some panels in the garage while its still damp outside.

    Only bits left are to sand and prime the door jambs, door outer skins and a once all over the body double checking for areas needing some fine filler.

    Pending weather conditions I might see some colour on it tomorrow. :D
     
  17. WhiteNight

    WhiteNight Littering and...

    [​IMG][/IMG]
    [​IMG][/IMG]
     
  18. Anti

    Anti 14.7 x 14.7 = 44.1

    nice throttle bodies! do want!
     
  19. WhiteNight

    WhiteNight Littering and...

    Z1 v2s the good ones!! Should see the intercoolers, size of a household printer.
     
  20. 8300zx9

    8300zx9 Active Member

    Plenum pull.....again. Didn't take as long this time. Doing the usual deletes. Managed to drop my 12mm spanners down between the firewall and the engine whilst removing the EGR.....Now its sitting on top of the Transmission waaaaayyy down out of reach... Not sure how to get it :/
     
Thread Status:
Not open for further replies.

Share This Page