Z31 Starter Motor issues

Discussion in 'Technical' started by Coopz, May 3, 2021.

  1. Coopz

    Coopz New Member

    Messages:
    13
    Likes Received:
    0
    Trophy Points:
    1
    Hi all just installed new starter motor occasionally it starts as normal but on other starts theres a click but if you leave the ignition switch in start position it fires I thought it could be earth issues so have run extra cable to body and checked wiring [old starter worked OK till it died] wiring appears OK there is a slight drop in voltage when it does click but I would think that is normal any ideas Coopz
     
  2. Martin Williams

    Martin Williams Well-Known Member

    Messages:
    1,052
    Likes Received:
    44
    Trophy Points:
    48
    I would suggest that you have a sticking/ sticky solenoid on the starter motor and its not pulling in every time or your solenoid power supply (small wire on starter motor) has poor connection
     
    Harts likes this.

Share This Page