Stainless Steel T-Bolt Clamp GB

Discussion in 'Group Buys' started by zx299, Jun 18, 2011.

Thread Status:
Not open for further replies.
  1. zx299

    zx299 Well-Known Member

    Posted today....

    TT & NA SS T Bolt Clamp GB Kits were posted today, so keep an eye out for them next week.

    A few kits weren't posted because money is still outstanding :rolleyes:.

    Anyone else who's interested in a SS T Bolt Clamp kit should contact me ASAP, the supplier is prepared to extend the GB price to forum members for a short period :cool:
     
  2. zx299

    zx299 Well-Known Member

    GB extended for a short period.....

    This GB has been left open to allow any "stragglers" one last opportunity to grab a TT/NA SS T Bolt clamp kit at the GB price.

    These kits are a complete set of Stainless Steel Intake/Radiator T Bolt hose clamps to suit any configuration on a 300ZX (see configuration post for details). These clamps will be the last clamps you ever have to buy for your zed & they look cool too :cool:

    If you want to grab a kit for your zed before the GB closes, PM me for details.
     
  3. DrewZ

    DrewZ member

    Hey mate Dual intakes and clamps just rocked up , thanks champ :)
     
  4. lidz

    lidz Well-Known Member

    My clamps were waiting for me too, excellent job Ian!
     
  5. Anti

    Anti 14.7 x 14.7 = 44.1

    Hey, can I get in on this? I just put on my FMIC and most of the clamps are rooted. I'll need to do a custom order, is that possible?

    Also, would you folks recommend doing the 4 TT intake pipes?
     
  6. zx299

    zx299 Well-Known Member

    FMIC configurations.....

    No custom order needed, 99% of TTzed configurations have been covered. Your possible combinations have been highlighted in RED

    TT Kits
    SMIC :- 67-72mm (2) & 57-62mm (14)

    Hardpipe SMIC :- 67-72mm (6) & 57-62mm (18)

    FMIC :- 67-72mm (2) & 57-62mm (22)
    OR
    Hardpipe FMIC :- 67-72mm (6) & 57-62mm (26)

    NA Kits
    Oem :- 67-72mm (4)

    Hardpipe :- 67-72mm (8)

    Radiator Kits
    Oem :- 48-52mm (2) & 40-44mm (2)
    OR
    Metal hardpipe :- 48-52mm (2) & 40-44mm (4)

    These are complete Intake/Intercooler/Radiator hose kits and the only thing you need to determine is.....
    a) do you have Oem Intake Hoses OR Hardpipes
    b) do you have Oem Radiator Hoses OR Metal lower radiator pipe.

    PM me if you have any questions.
     
  7. Anti

    Anti 14.7 x 14.7 = 44.1

    I've got silicon intake hoses and will be ordering silicon upper and lower rad hoses, that's a good idea to get some clamps for that. It's the FMIC I really neeed, hard pipes obviously. Already got some, need to convert the rest. I'll do a head count and get back to you.
     
  8. discus177

    discus177 New Member

    I received mine today, they look fantastic. Now I need piping.
     
  9. zx299

    zx299 Well-Known Member

    GB closing next week.....

    Last chance to order the SS T Bolt clamp kits at a GB price.

    This GB will be wrapped up next week, so anyone wanting any of the kits should contact me ASAP :cool:
     
  10. zx299

    zx299 Well-Known Member

    Why these clamp kits ?????

    Somebody just asked me "What's so special about these clamp kits, and why should I buy one" ?

    a) Much stronger
    T Bolt clamps have a more positive action and can be tightened to FAR greater torques than wire or worm gear clamps without twisting or breaking.

    b) Much wider
    Your average worm gear clamp is 9-15mm wide (depending on diameter), whereas the T Bolt clamps in these kits are ALL 19mm wide so they won't cut into your hoses. They also look neater because of uniformity.

    c) Stainless Steel
    They always look neater because they don't rust or oxidise.

    d) Ready made kits
    No measuring or counting needed. 90% of zeds are covered by these kits, so no need to climb under the car with a pair of calipers and a ruler.

    e) Price
    Due to the buying power of a GB, we have been able to negotiate a huge saving on the normal price of these quality clamps.

    If you're still in doubt, send a PM to one of the members who've already purchased one of these kits and ask their opinion about "bang for buck value" :cool:
     
  11. OZX_320

    OZX_320 Detachable Member

    Ian,

    Will take the following please:-
    TT intake kit (silicone piping)
    NA intake kit (hardpipes, silicone couplers)

    Shoot me a price with postage

    Cheers
    Michael
     
  12. zx299

    zx299 Well-Known Member

    GB closing this weekend....

    SS T Bolt GB will be wrapped up this weekend, so put your hand up if you want a set before closing :cool:
     
  13. zx299

    zx299 Well-Known Member

    SS T Bolt Clamp GB closing .....

    Last chance to get in on this GB :cool:
     
Thread Status:
Not open for further replies.

Share This Page