Will be sure later today !!!!!!!! There is no inherant power increase with new injectors. But to fuel bigger turbos etc You may need bigger injectors. Thats why this has come up. It is sometimes easy to max stock ones and these are the fix. IE: if you get GT28R's or GT28RS or similar. You really should get something like these as well.
Confirmed !!!! They definitely fit our fuel rails with the collars. Buy em !!!!! The part number is 63561 for 650cc. The 800cc p/n is 63564 They are high Impedance so fit right in. They also come with new Injector connectors in the package. All good
650's are the right size! The problem with high impendence injectors is, they are slower to open/close than low impendence injectors, this causes rough idle. Low impendence injectors need a closed loop A/M ecu, most A/M ecu are able to run high or low impendence injectors, up to 8 ohm low impedance or up to 32 ohm high impedance injectors. If you try to opperate low impendence injectors with the stock ecu, the current drain would fry it!
sweet graham, does this mean your not sending the collar to me to test?? start making em dude.. i want em next week... lol my injectors are already on their way
I will take a collar set kit. Just send me a message or an Email as to when and how you want payment.
nice how much is payment? and what bank details i put money too plz. Also when will we be recieving them? eta?
I just been buying all the other bits for the Collar kit. I am gonna have to jack the price by $2 ea cause the Damn Viton Orings cost me $2 instead of about 0.30 cents for the pair of nitrile rubber ones. So collars are $22 each guys. plus $5 postage the set. $137 for 6 posted account is BSB 013442 acc 535782109 Graham Johnson Make sure you put your screen name and "collars" on the deposit so I know whos paid etc. Thanks guys. This wont take as long as the bloody dump pipes. Now you have all ordered on Greenline ?? GJ
Thanks Graham Money sent for collar set. Any probles just let me know. I will hold off on getting the injectors till a bit closer to the scheduled job.
are you confident your machinist can make the copies exact.. i dont want any problems with leakage past the o-rings money sent by the way
Being done on a CNC Andrew. They are arespected shop and apparently do a lot of other automotive stuff. I recon they will be fine. Only issue is that as they are reputable, I couldnt do a cash deal. I will be QA'ing them before I pay in any case. If they are wrong they can make em again.
Just a heads up on Sard 650 injectors. I have a set coming from Greenline and part of the corresponence they mentioned that they had "very limited stock", and they won't have more stock until the end of June. In total they cost me $660 delivered, so a good deal me thinks, but I suggest that you contact them asap if you want a set.
I beleive you got the last set... Anyway they are expecting it by the end of June so that isnt very far away really and still an excelent price.
bah so no injectors left? Then ill wait till they are available before i hand out for the collars. Bleh! A well. end of june is just around the corner
Gee thanks, I have to float the collar money till the injectors are available again. Hope everyone else does that. NOT !!! I am gonna advertise them on TTnet. If they get sold they are gone.
Maybe I should jack the price up for everyone that doesnt preorder and prepay!! You realize I had to buy 120 of these. Thats 20 cars worth. The money has to come from somewhere and at the moment it is out of my pocket except for the few people who prepaid. (thanks guys)
Not everyone ....>> I'll buy them straight away. I'm not in a great rush for injectors but I know your collars are a bargain that might never come up again. zlove
Tek.. searched on tt.net regarding my injectors and apparently they are the same size/shape as SARDS.. although there seems to be mixed answers on it. I just realised what I did wrong.. LOL .. remember the injector connectors I got off you..? They are all ready to hook up to the injectors but... I totally forgot my DENSO ones use a different connector!!! can you get me some DENSO connectors? LMAO No big deal though, I will just cut them off and use them for all of the other connectors. I changed the temp sensor, and started to do all of the idle ones with the 3 spares I had, but ran short when I was doing it but.. I have 6 extras now
As it turns out the border kit injectors are different Paul. Look at the photo earlier on in the thread. The top is a different moulding. The right ones will fit better than what we saw the other night. I wil find out bout the connnectors. I have to get some ordinary ones tomorrow for Chad. I will look while I am there. You get new connectors with the SARD injectors in the kit