QLD Performance Parts + wrecking car

Discussion in 'Car Parts for Sale or Wanted' started by sevenangrypenguins, Nov 22, 2013.

Thread Status:
Not open for further replies.
  1. Mr G

    Mr G Active Member

    Alright, steering rack at $80.
     
  2. sevenangrypenguins

    sevenangrypenguins Active Member

    No worries, pm me when you want to pick up.
     
  3. ZX1990

    ZX1990 2+2 TT Manual

    PM sent for knocklink, brake lines and bonnet.....
     
  4. Shane001

    Shane001 Well-Known Member

    Strut bars received, thanks Chris :)
     
  5. sevenangrypenguins

    sevenangrypenguins Active Member

    UPDATED , sold items removed.

    Stock engine,apparently rebuilt at some stage (no receipts) Good compression all between 145-150psi with long duration cams. Ported heads and heavy duty valve springs. Selling as a BARE engine. Can include stock cam gears/cams but wont be installed on engine. Timing belt kit is there also with low use. You can still read the writing on the belt.
    $1000

    Z1 adjustable exhaust cam gears.
    $160

    ATI Street damper, will include the ribbed belts in good condition
    $350 (possibly sold)

    Quaife LSD with leader gears low km's since rebuild with new bearings.
    $2200

    GT2860rs turbo's from Z1 about 10000km use + custom oil lines for easy install. Ceramic coated exhaust housings.
    $1800

    Complete custom made 3" Exhaust, 5 bolt ams dumps ceramic coated (a bit scratched up), high flow cats, one of the front pipes has a few dents from driving over rocks but doesn't affect performance, 2 resonators in the catback, magnaflow X pipe, twin magnaflow race mufflers also has 2 wideband bungs in front pipes. Perfect for anyone looking to make big power, cost was 2k+ Can ship this on a pallet at buyers cost.
    $800

    Volk GT-C 17" wheels, front 8" +35, rear 9" +34.
    $1000

    Stock Recircs with BDE goose honk kit fitted, as new silicone recirc piping included. Recirc right angle pipe chopped off, not sure how well they will fit stock piping.
    $70

    Specialty Z high capacity oil pan with trap doors.
    $380

    Z1 platinum steel driveshaft only ~1000km's use. No vibrations, uses the stock rear cv type joint,
    hardy spicer yoke. cost was $800 landed in Aus.
    $500

    Powertrix Ultralight coilovers 8/6 springs.
    $1000 (sold pending pick up)

    Dashboard in very good condition from a 96/97 model. Pick up only.
    $100

    Gizzmo MS-IBC boost controller near new. Solenoid is missing screw in barbs.
    $150 + post

    Brand new Earls thermostatic oil sandwich plate 10AN fittings with right angle aeroflow fittings, I test fitted it with my setup and it would of fit okay.
    $150 + post.

    Earls 25 row oil cooler -10AN fittings + 4 Metres oil braided oil line + 4 aeroflow right angle bends and 2 hose ends.
    $400 (or $500 with the thermatic sandwich plate)

    Gauge cluster good working condition showing 186K
    $60 (sold pending pick up)

    Oil pickup new, gasket type.
    $20

    B-pillar trims very good condition from late model zed.
    $50

    Gauge pods near new.
    $40

    Aeromotive fuel pressure regulator -6AN fittings, brand new
    $135

    D-Project camber arms, They use high quality rod ends and are very well made, absolutely no play in these just a few chips in the powder coat.
    $100

    Power Steering rack, came from a late model zed with only 30K on the clock, no leaks, good boots and will include the ES bushings.
    $80 (sold pending pick up)

    Complete AC system from a 97 model low km zed. Near new condenser (some fin damage from one of my engine pulls) Cools very well.
    $200

    Good headlights $50 each.

    Heater box from 97 model zed very good condition works in my 89 model.
    $50

    Manual Gearbox, I have given it a hard time but it still shifts very nicely. Speed sensor removed, Has new slave on it, includes flywheel and cushion button clutch that has had a hard life, but still works.
    $400

    Power steering pump rebuilt by me a while back also has a pirtek replacement hose (the one that normally leaks). Does not leak at all. Pump has had veins removed for HICAS delete and hoses looped.
    $100

    Alternator works good, I replaced the bearings in it at some stage.
    $50

    Near new coolant pipes.
    $40 (sold pending pick up)

    Subframe (sold pending pick up)

    Stock TT rods with ARP bolts fitted, closed and honed by machine shop.
    $120

    5mm wheel spacers have the longer studs as well.
    $50
     
  6. sevenangrypenguins

    sevenangrypenguins Active Member

    Turbo's, dash and pod mounts sold.
     
  7. sevenangrypenguins

    sevenangrypenguins Active Member

    UPDATED , sold items removed.

    Stock engine,apparently rebuilt at some stage (no receipts) Good compression all between 145-150psi with long duration cams. Ported heads and heavy duty valve springs. Selling as a BARE engine. Can include stock cam gears/cams but wont be installed on engine. Timing belt kit is there also with low use. You can still read the writing on the belt.
    $1000

    Z1 adjustable exhaust cam gears.
    $150

    Quaife LSD with leader gears low km's since rebuild with new bearings.
    $2100

    Complete custom made 3" Exhaust, 5 bolt ams dumps ceramic coated (a bit scratched up), high flow cats, one of the front pipes has a few dents from driving over rocks but doesn't affect performance, 2 resonators in the catback, magnaflow X pipe, twin magnaflow race mufflers also has 2 wideband bungs in front pipes. Perfect for anyone looking to make big power, cost was 2k+ Can ship this on a pallet at buyers cost.
    $800

    Volk GT-C 17" wheels, front 8" +35, rear 9" +34.
    $1000

    Stock Recircs with BDE goose honk kit fitted, as new silicone recirc piping included. Recirc right angle pipe chopped off, not sure how well they will fit stock piping.
    $60

    Specialty Z high capacity oil pan with trap doors.
    $350

    Z1 platinum steel driveshaft only ~1000km's use. No vibrations, uses the stock rear cv type joint,
    hardy spicer yoke. cost was $800 landed in Aus.
    $480

    Gizzmo MS-IBC boost controller near new. Solenoid is missing screw in barbs.
    $150 + post

    Brand new Earls thermostatic oil sandwich plate 10AN fittings with right angle aeroflow fittings, I test fitted it with my setup and it would of fit okay.
    $150 + post.

    Earls 25 row oil cooler -10AN fittings + 4 Metres oil braided oil line + 4 aeroflow right angle bends and 2 hose ends.
    $400 (or $500 with the thermatic sandwich plate)

    Oil pickup new, gasket type.
    $20

    B-pillar trims very good condition from late model zed.
    $50

    Aeromotive fuel pressure regulator -6AN fittings, brand new
    $135

    D-Project camber arms, They use high quality rod ends and are very well made, absolutely no play in these just a few chips in the powder coat.
    $100

    Power Steering rack, came from a late model zed with only 30K on the clock, no leaks, good boots and will include the ES bushings.
    $80 (sold pending pick up)

    Complete AC system from a 97 model low km zed. Near new condenser (some fin damage from one of my engine pulls) Cools very well.
    $200

    Good headlights $50 each.

    Heater box from 97 model zed very good condition works in my 89 model.
    $50

    Manual Gearbox, I have given it a hard time but it still shifts very nicely. Speed sensor removed, Has new slave on it, includes flywheel and cushion button clutch that has had a hard life, but still works.
    $400

    Power steering pump rebuilt by me a while back also has a pirtek replacement hose (the one that normally leaks). Does not leak at all. Pump has had veins removed for HICAS delete and hoses looped.
    $100

    Alternator works good, I replaced the bearings in it at some stage.
    $50

    Stock TT rods with ARP bolts fitted, closed and honed by machine shop.
    $120

    5mm wheel spacers have the longer studs as well.
    $40
     
  8. sevenangrypenguins

    sevenangrypenguins Active Member

    Diff sold! Thanks Rob.
     
  9. rob260

    rob260 Administrator Staff Member

    Sweet -payment received all good? Can you pm me the dimensions of the pallet when you get a chance and I'll organise pickup
     
  10. GWZED

    GWZED 97 2+2 TT Targa

    Received this last week while i was away. Thanks Chris, well packaged and very happy.
     
  11. sevenangrypenguins

    sevenangrypenguins Active Member

    Steering rack sold, thanks Kris.
     
  12. munted

    munted New Member

    Ptu arrived safe n sound, just in time or holiday fun

    Thanks dude :D
     
  13. Shane001

    Shane001 Well-Known Member

    Payment sent :)
     
  14. Mr G

    Mr G Active Member

    No worries, nice to meet you - good luck with the rest of your parts for sale!
     
  15. sevenangrypenguins

    sevenangrypenguins Active Member

    UPDATED , sold items removed.

    Stock engine,apparently rebuilt at some stage (no receipts) Good compression all between 145-150psi with long duration cams. Ported heads and heavy duty valve springs. Selling as a BARE engine. Can include stock cam gears/cams but wont be installed on engine. Timing belt kit is there also with low use. You can still read the writing on the belt.
    $1000

    Z1 adjustable exhaust cam gears.
    $150

    Complete custom made 3" Exhaust, 5 bolt ams dumps ceramic coated (a bit scratched up), high flow cats, one of the front pipes has a few dents from driving over rocks but doesn't affect performance, 2 resonators in the catback, magnaflow X pipe, twin magnaflow race mufflers also has 2 wideband bungs in front pipes. Perfect for anyone looking to make big power, cost was 2k+.
    $800 pick up only now.

    Volk GT-C 17" wheels, front 8" +35, rear 9" +34.
    $1000

    Stock Recircs with BDE goose honk kit fitted, as new silicone recirc piping included. Recirc right angle pipe chopped off, not sure how well they will fit stock piping.
    $60

    Specialty Z high capacity oil pan with trap doors.
    $300

    Z1 platinum steel driveshaft only ~1000km's use. No vibrations, uses the stock rear cv type joint,
    hardy spicer yoke. cost was $800 landed in Aus.
    $450

    Gizzmo MS-IBC boost controller near new. Solenoid is missing screw in barbs.
    $150 + post

    Brand new Earls thermostatic oil sandwich plate 10AN fittings with right angle aeroflow fittings, I test fitted it with my setup and it would of fit okay.
    $150 + post.

    Earls 25 row oil cooler -10AN fittings + 4 Metres oil braided oil line + 4 aeroflow right angle bends and 2 hose ends.
    $400 (or $500 with the thermatic sandwich plate)

    Oil pickup new, gasket type.
    $20

    B-pillar trims very good condition. Have holes for seat belts.
    $50

    Aeromotive fuel pressure regulator -6AN fittings, brand new
    $135

    Complete AC system from a 97 model low km zed. Near new condenser (some fin damage from one of my engine pulls) Cools very well.
    $200

    Good headlights $50 each.

    Heater box from 97 model zed very good condition works in my 89 model.
    $50

    Manual Gearbox, I have given it a hard time but it still shifts very nicely. Speed sensor removed, Has new slave on it, includes flywheel and cushion button clutch that has had a hard life, but still works.
    $400 (sold pending pickup)

    Power steering pump rebuilt by me a while back also has a pirtek replacement hose (the one that normally leaks). Does not leak at all. Pump has had veins removed for HICAS delete and hoses looped.
    $100

    Alternator works good, I replaced the bearings in it at some stage.
    $50

    Stock TT rods with ARP bolts fitted, closed and honed by machine shop.
    $120

    5mm wheel spacers have the longer studs as well.
    $40
     
  16. bRACKET

    bRACKET Do Right Dean

    ATI balancer received, thank you!
     
  17. sevenangrypenguins

    sevenangrypenguins Active Member

    UPDATED , sold items removed.

    Stock engine,apparently rebuilt at some stage (no receipts) Good compression all between 145-150psi with long duration cams. Ported heads and heavy duty valve springs. Selling as a BARE engine. Can include stock cam gears/cams but wont be installed on engine. Timing belt kit is there also with low use. You can still read the writing on the belt.
    $1000

    Z1 adjustable exhaust cam gears.
    $150

    Complete custom made 3" Exhaust, 5 bolt ams dumps ceramic coated (a bit scratched up), high flow cats, one of the front pipes has a few dents from driving over rocks but doesn't affect performance, 2 resonators in the catback, magnaflow X pipe, twin magnaflow race mufflers also has 2 wideband bungs in front pipes. Perfect for anyone looking to make big power, cost was 2k+.
    $800 pick up only now.

    Volk GT-C 17" wheels, front 8" +35, rear 9" +34.
    $1000

    Specialty Z high capacity oil pan with trap doors.
    $300

    Z1 platinum steel driveshaft only ~1000km's use. No vibrations, uses the stock rear cv type joint,
    hardy spicer yoke. cost was $800 landed in Aus.
    $450

    Gizzmo MS-IBC boost controller near new. Solenoid is missing screw in barbs.
    $150 + post

    Brand new Earls thermostatic oil sandwich plate 10AN fittings with right angle aeroflow fittings, I test fitted it with my setup and it would of fit okay.
    $150 + post.

    Earls 25 row oil cooler -10AN fittings + 4 Metres oil braided oil line + 4 aeroflow right angle bends and 2 hose ends.
    $400 (or $500 with the thermatic sandwich plate)

    Oil pickup new, gasket type.
    $20

    B-pillar trims very good condition. Have holes for seat belts.
    $50

    Aeromotive fuel pressure regulator -6AN fittings, brand new
    $135

    Good headlights $50 each.

    Heater box from 97 model zed very good condition works in my 89 model.
    $50

    Power steering pump rebuilt by me a while back also has a pirtek replacement hose (the one that normally leaks). Does not leak at all. Pump has had veins removed for HICAS delete and hoses looped.
    $100

    Alternator works good, I replaced the bearings in it at some stage.
    $50

    Stock TT rods with ARP bolts fitted, closed and honed by machine shop.
    $120

    5mm wheel spacers have the longer studs as well.
    $40
     
  18. redZracer

    redZracer New Member

    Thx for the ac system Chris ,fit it yesterday 12hrs job! No leaks :D hope u have a cool Xmas 2,didn't use the thermo switch,glad aus300zx is active !!!
     
  19. sevenangrypenguins

    sevenangrypenguins Active Member

    No worries mate glad you got it in OK.
     
  20. lcram

    lcram O'le Fella

    Hey mate thanks for the heater core, yesterday my alternator crapped out due to oil seeping all over it, if the alt is still up for grabs is it for TT? shoot me price + post vic 3305 same as before.
    Linton
     
Thread Status:
Not open for further replies.

Share This Page