QLD Performance Parts + wrecking car

Nice, thanks mate.

 

Camber arms sold.

Will do the Brembo's for $750 posted.

 

EPR Windage kit received

Thanks Chris.

 

Photo's of the front wheels. Will get some photo's of the rear ones when I get them off. But they are in the same condition, tyres are cactus though.

Marks on the chrome lip from everyday use but no rash. Front tyres are still good with Federal RSR rubber.

They also come with lug nuts and lock nut key.

 

Diff and Brembo's sold pending payment.

 

TwinZ wing sold.
White line front sway bar sold.

 

Handles and covers arrived today. Very well packed, thanks mate.

 

No worries ed.

Rear wheels. Tyres are no good.




D-Project camber arms and traction rods $120 per pair.
They use high quality rod ends and are very well made, absolutely no play in these just a few chips in the powder coat.



Front coilovers, still have to remove the rears.


Solid rear swaybar 27mm solid japanese brand $120


Subframe with alloy main bushes and poly mounts in the back for the diff $150

 

Haltec is great man- thanks again
Are you down to the turbos yet?

 

Taking the engine out Friday.

 

Hey Chris, I'll take the coilovers mate.
Will send pm later today.

 

UPDATE, sold items removed.

Engine is now removed and I'll start pulling the extra's off it for sale.

Stock engine apparently rebuilt at some stage, got it from Chrispy. Heads ported by Eric former A2Zed with heavy valve springs installed. New head gaskets installed. Good compression all between 145-150psi with long duration cams. Selling as a BARE engine. Can include stock cam gears/cams but wont be installed on engine.
Bare engine $1200 or $1800 with Jwt R4+ cams.

JWT R4+ Cams with sprocket adapter kit included for S1 gears.
$650

S1 BDE intake cam gears 10000km use.
$380

Z1 adjustable exhaust cam gears.
$200

ATI Street damper.
$380

Quaife LSD with leader gears low km's since rebuild with new bearings.
$2200 (sold maybe?)

GT28RS turbo's from Z1 about 10000km use + custom oil lines for easy install. Ceramic coated exhaust housing.
$2000 (possibly sold)

Complete custom made 3" Exhaust, 5 bolt ams dumps ceramic coated (a bit scratched up), high flow cats, one of the front pipes has a few dents from driving over rocks but doesn't affect performance, 2 resonators in the catback, magnaflow X pipe, twin magnaflow race mufflers also has 2 wideband bungs in front pipes. Perfect for anyone looking to make big power, cost was 2k+
$1000



Volk GT-C 17" wheels, front 8" +35, rear 9" +34.
$1200

AMS exhaust manifolds, ceramic coated black.
$300

4x Braided Brake lines ADR approved.
$150

Stock Recircs with BDE goose honk kit fitted, as new silicone recirc piping include.
$100

Specialty Z high capacity oil pan with trap doors.
$450

Z1 platinum steel driveshaft only ~1000km's use. No vibrations, uses the stock rear cv type joint,
hardy spicer yoke. cost was $800 landed in Aus.
$550

Powertrix Ultralight coilovers 8/6 springs.
$1000 (sold pending pick up)

Dashboard in very good condition from a 96/97 model. Pick up only.
$200

UAS front strut brace, white.
$130

UAS rear strut brace, powder coated black
$130

Or the pair for $240



A-pillar finishers near new + near new autometer boost gauge already installed. Selling together.
$150 + post.

Gizzmo MS-IBC boost controller near new.
$160 + post

Brand new Earls thermostatic oil sandwich plate 10AN fittings with right angle aeroflow fittings, I test fitted it with my setup and it would of fit okay.
$150 + post.

Earls 25 row oil cooler -10AN fittings + 4 Metres oil braided oil line + 4 aeroflow right angle bends and 2 hose ends.
$400 (or $500 with the thermatic sandwich plate)

Gauge cluster good working condition showing 186K
$80

Oil pickup new, gasket type.
$20

B-pillar trims very good condition from late model zed.
$70

Gauge pods near new.
$50

Aeromotive fuel pressure regulator -6AN fittings, brand new
$135

Ezzupturbo Bonnet Strut kit
$65

Windscreen Cowls left and right, as new condition with clips
$120

D-Project camber arms, They use high quality rod ends and are very well made, absolutely no play in these just a few chips in the powder coat.
$120

Power Steering rack, came from a late model zed with only 30K on the clock, no leaks, good boots and will include the ES bushings.
$180

Complete AC system from a 97 model low km zed. Near new condenser (some fin damage from one of my engine pulls) Cools very well.
$500



Stock 2 piece tail shaft with near new centre bearing, never vibrated.
$50

Good headlights $50 each.

Heater box from 97 model zed very good condition works in my 89 model.
$80

near new heater core with near new tap
$120

Manual Gearbox, I have given it a hard time but it still shifts very nicely.
$400

Subframe with alloy main bushes and poly mounts in the back for the diff
$100

 

Engine is now just heads and block, ported stock manifolds, will include the timing belt kit, has RameyZ idler studs

ATI Balancer. White mark on the edge is TDC paint mark I put on to make it easier to set the timing.


400lph Walbro Pump non e85 version, very quiet in operation.
$100



Ash spec 2.5" intake pipe kit with apexi filters.
$200

 

AMS 2.5" intercooler pipe kit bit scratched up from the many engine pulls.
$180

 

R4s posted to 2147?

 

R4's and cam gears just sold sorry.

 

UAS clutch line with banjo fittings, near new.
$75



Bit of an update on the cams I found some marking on one of the cam lobes so will accept any offers on these.

 

UAS engine mounts
$100



Cam gears

 

PM'd about walbro and ash spec 2.5

 

Ash spec intake piping sold.
AMS manifolds sold.
fuel pump sold.
uas engine mounts sold.
clutchline sold.



Series 2 PTU
$50



ARP Head and main stud kit. Used but not for very long.
$180



TT Heads have about 10 000km use since rebuilt. they were skimmed, 1mm oversize exhaust valves, all new intake valves, JWT heavy duty valve springs, new valve stem seals, had some port work also done by Rollin.
$600



Power steering pump rebuilt by me a while back also has a pirtek replacement hose (the one that normally leaks). Does not leak at all. Pump has had veins removed for HICAS delete and hoses looped.
$150

Alternator works good, I replaced the bearings in it at some stage.
$50



Near new coolant pipes.
$50



Turbo's removed.