QLD Performance Parts + wrecking car

Gear knob, centre console and Z1 throttles sold pending payment.

Seats, door trims and leather interior panels sold pending pickup.

 

Strut braces.

http://imageshack.us/scaled/landing/826/gfuu.jpg

 

Ill take the console surround...pm me cost of post to 6401

 

Radiator/tension rods sold pending payment.

 

UPDATED and collated.

Stock engine apparently rebuilt at some stage, got it from Chrispy. Heads ported by Eric former A2Zed with heavy valve springs installed. New head gaskets installed. Doesn't blow any smoke makes good power, compression test to follow. Selling as a BARE engine. Can include stock cam gears/cams but wont be installed on engine.
Bare engine $1400 or $2000 with Jwt R4+ cams.

S1 BDE intake cam gears 10000km use.
$400

Z1 adjustable exhaust cam gears.
$200

ATI Street damper.
$400

Plenum with larger 58mm? Z1 throttles type2... SOLD


740cc Jecs injectors will include plugs.
$350

Haltech Platinum Pro Plugin ecu + map sensor and air temp sensor + input/output plug is pre wired also.
$1400

Quaife LSD with leader gears low km's since rebuild with new bearings.
$2400

GT28RS turbo's from Z1 about 10000km use + custom oil lines for easy install. Ceramic coated exhaust housing.
$2000

Complete custom made 3" Exhaust, 5 bolt ams dumps ceramic coated (a bit scratched up), high flow cats, one of the front pipes has a few dents from driving over rocks but doesn't affect performance, 2 resonators in the catback, magnaflow X pipe, twin magnaflow race mufflers also has 2 wideband bungs in front pipes.
$1000

Volk GT-C 17" wheels, front 8" +35, rear 9" +34. No gutter rash but the chrome lip has been damaged in some spots by something?
$1200

AMS exhaust manifolds, ceramic coated black.
$350

R33 GTR Brembo Calipers.
$800

4x Braided Brake lines ADR approved.
$180

Stock Recircs with BDE goose honk kit fitted.
$70

Nagisa Fender Braces... SOLD

Twin Z type 1 rear wing un-fitted + Light. Local pickup only.
$400

Specialty Z high capacity oil pan with trap doors.
$500

Z1 platinum steel driveshaft only ~1000km's use. No vibrations, uses the stock rear cv type joint,
hardy spicer yoke. cost was $800 landed in Aus.
$550

Powertrix Ultralight coilovers 8/6 springs.
$1000

UAS type 2 front Camber arms barely driven on.
$480

Dashboard in very good condition from a 96 model. Pick up only.
$250

Leather seats front and back re-trimmed at some stage fair condition no rips/tears. SOLD pending pick up.

Black door trims from late model zed modified for seat belt on the door, good condition. SOLD pending pick up

UAS front strut brace, white.
$150

UAS rear strut brace, powder coated black
$150

Ultra Racing tension rod brace.
$100

Carcraze 56mm radiator barely used... SOLD pending payment


Also have rear subframe with d-project camber arms and traction rods, spl titanium hicas lock out that replaces the stock joints with heim joints, ES bushes throughout and the main mounts have alloy bushes. includes rebuilt calipers and RDA rotors with A1RM pads in there. Will sell complete for
$600 pick up only.

Leather Re-trimmed panels, glovebox, centre console, underdash drivers side, and in the back...SOLD pending pick up.

Whitline Front Sway bar + rear one think the brand was CMR 27mm
$250 plus postage.

Near new centre console surround, ash tray and near new leather boot with red stiching...SOLD

Gear knob near new...SOLD


A-pillar finishers near new + near new autometer boost gauge already installed. Selling together.
$150 + post.

Gizzmo MS-IBC boost controller near new.
$180 + post

Series 2 CAS brand new never fitted.
$250 + post.

Brand new Earls thermostatic oil sandwich plate 10AN fittings with right angle aeroflow fittings, I test fitted it with my setup and it would of fit okay.
$150 + post.

Innovative wideband controller, comes with sensor that was replaced not that long ago. Works great with nistune.
$100 + post.

More stuff to come.

 

Cheers for the info and prices. Turbos aren't what I was hoping for in size. If the haltech is still available Saturday, I'll call in. I'll chase up your address Friday night. Garry

 

I'll be in Adelaide Friday to Monday.

This is the turbo kit for anyone interested. 3K+ once you pay shipping, GST and get new oil lines made.
http://www.z1motorsports.com/product_info.php?products_id=94

Setup with E85 these will push you well into the 400+rwkw area.

 

Aeromotive fuel pressure regulator -6AN fittings, brand new
$150

Series 2 cas connector
$20 or free if you buy the S2 cas.



Earls 25 row oil cooler -10AN fittings + 4 Metres oil braided oil line + 4 aeroflow right angle bends and 2 hose ends.
$400 (or $500 with the thermatic sandwich plate)




Gauge pods near new.
$50



B-pillar trims very good condition from late model zed.
$70




Door handles and door trim pieces near new.
$50



Gauge cluster good working condition showing 186K
$80



Radiator hardpipe
$70



EPR windage kit
$50


Oil pickup new, gasket type.
$20

 

For anyone that buys the diff, I'll include the near new NA speedo sender in the gearbox as well.

 

Ill take the wideband. How much posted to 2147. Will transfer money today

 

How much to post the EPR Windage Kit to 2118?

Thanks.

 

EPR Windage kit SOLD

 

how much for the brembos

 

sorry I saw it $800

 

Let me know when you are back in town- 0415 570 059. I work interstate during most weeks. Keen on the Haltech if it is in good condition and not old. Receipts would be a bonus if available

 

ECU and injectors sold pending pickup.

 

Ezzupturbo Bonnet Strut kit
$75

Windscreen Cowls as excellent condition with clips
$130






Exhaust system

 

PM sent re the door handles and trim pieces

 

^and sold will send today payment already cleared!

S2 cas sold.