QLD Parting out 90ZTT

Discussion in 'Car Parts for Sale or Wanted' started by Martin, Apr 20, 2010.

Thread Status:
Not open for further replies.
  1. Martin

    Martin New Member

    as most of you know, 90ZTT is no more due to an idiot fellow road user failing to give way, i will be buying the wreck back from insurance and it is VERY likely i will be parting out soon.

    Please note: i wont have the car back for at least another week (start of may)

    This was one of the best zeds in brisbane, get in quick and reserve parts
    In its glory days:

    The state it is in:

    Engine: $4500
    Rebuilt ~7000kms ago with the following specs:
    271RWKW @17psi
    -Full engine rebuild including:
    *ARP bolts all round
    *Cometic Metal Headgaskets
    *Chromoly Rings
    *King Race Bearings
    *Port Dag Cleaning
    *Full Engine Balance
    *Brand new Water and Oil Pumps
    *GFB Underdrive Pulley
    *Heads Reconditioned with new Valves
    *Nismo 555cc Injectors
    *Brand New Engine Harness with S2 PTU
    *Front Mount Intercooler
    -Full 100k service
    -NGK IX Iridium Spark Plugs
    -Hypergear ATR25 300hp Turbos

    Manual Gearbox: $1800
    Very good condition, comes with:
    *Chromoly Lightened Flywheel
    -near new exedy sports tuff clutch

    Miscellaneous engine related:
    -Koyo Radiator- $200
    -Twin K&N Pod filters with custom air box - $250 (already has first dibs)
    -Custom twin 2.5" Turbo-back exhaust with Tuneagent Dumps, Hi flow cats, H pipe and quad outlet rear mufflers - $800 (already has first dibs)
    -Stillen Intake Piping - $150

    Suspension/Drive train
    -Pedders Sports Ryder Springs (20mm lowered) & Bilstein HD Shocks-$500
    -Energy Suspension Urethane bushes(full kit) (not fitted)- $500
    -17'x8 front and 17'x9' rear AVS Wheels with brand new nexen front tires bridgestone adrenaline rear (showing camber wear)- $1250
    -Braided Brake lines all round: $200
    Braided clutch lines:$100
    -Short Shifter- $70 (has dibs)
    -Painted Calipers (red) with bendix ultimate pads- $200
    -Carbon Fibre Driveshaft- $1000

    - Fully retrimmed black leather Seats- $900
    - All interior tweed proffesionally retrimmed in Black Leather- all panels for $500
    - Razo Shift knob- $30
    - New Leather Gear and Handbrake Boot- $40
    - Cluster with 300KM Speedo, all gauges in White and guage rings: $300
    - Autometer Boost gauge and Water temp gauge on A-Pillar: $250 (already has first dibs)
    - 10" Sub in Custom Box as to not take all the boot space- $200
    - Brand new rear carpet- $150
    - Brand new parcel shelf- $100

    - Rear hatch, brazillian with infil panel, resprayed in aztec red- $500
    - Genuine Kamanari Side Skirts & Door fillers- $POA (already has third dibs lol)
    - Genuine Kamanari Rear Bar- $POA (already has third dibs lol)

    On top of these goodies if you have any other parts you need, as per any other zed being parted out, let me know:zlove:
    Last edited: Apr 20, 2010
  2. MagicMike

    MagicMike Moderator Staff Member

    Dibs on injectors if it comes to that :)
  3. Martin

    Martin New Member

    trying to sell the engine whole mike, but will let you know...
  4. Zano

    Zano Member

    Hi,would like to query chromoly flywheel age and type and what type of clutch/condition
  5. Martin

    Martin New Member

    I believe the flywheel is a JUN item, will confirm when parting out begins, installed with new exedy sports tuff clutch same time as rebuild (~9 months and 7000kms ago)
  6. Chad_

    Chad_ Well-Known Member

    pm sent re black interior
  7. Mikey5555

    Mikey5555 Grid Runner

    Hey Martin sorry to see such a nice zed going :(

    I'm very interested in the Handbrake and Gear boot for $40

    Can you please Pm me details and we can from there?


  8. Lovic

    Lovic Non-member

    dibs on koyo radiator!
  9. pennyarvs

    pennyarvs New Member

    Interested with the leather gear and handbrake boot. And any whiteline swaybars and/or strut braces?
  10. rollin

    rollin First 9

    I built the motor so please feel free to contact me with any technical questions about it
  11. pennyarvs

    pennyarvs New Member

    Oh, mikey got in first! :)

    Interested also with the steering wheel...
  12. Zano

    Zano Member

    dibs on clutch and flywheel
  13. rollin

    rollin First 9

    that flywheel has been balanced to the motor so shouldnt really be seperated, same with the UDP
  14. Martin

    Martin New Member

    noted, thankyou for your input niall :)
  15. Zano

    Zano Member

    Yes,Thankyou,much appreciated.
  16. sevenangrypenguins

    sevenangrypenguins Active Member

    i'll buy turbo's if you decide to seperate
  17. boo5t

    boo5t Member

    PM sent
  18. 300zed1day

    300zed1day New Member

    How much for drivers side mirror ?
  19. whoppersandwich

    whoppersandwich Le Canon De Douche

    Hey Martin, are those stillen intake pipes silicon or the hardpipes with silicon couplers? If it's the latter then dibs:D
  20. Mikey5555

    Mikey5555 Grid Runner

    Just by 3 mins, sorry dude but mines all flaking
Thread Status:
Not open for further replies.

Share This Page