New from Brett Dempsey Engineering; top feed fuel rail for Z32 300zx with bolt on injector adapters. There comes a point in the quest for more horsepower where stock side-feed type injectors simply become out-classed. BDE fuel rails work with the stock upper plenum and allow the VG30DE(TT) to take advantage of the higher flow capacities and superior technology of top-feed injectors. BDE fuel rails are anodized black and feature -6AN o-ring port inlets and outlets for guaranteed leak-free performance. These new fuel rails require no removal and modification to the lower plenum. They are in my opinion the best top feed rail currently on the market for Z32 and offer the following benefits Twin -6 in/out for consistent fuel pressure Critical parts are individually secured rather than stacked like dominos on top of one another. The injectors do not form a structural part of this arrangement so there is no stress on the injector body I have these advertised at RGS performance for $700. Some pics Bolt-on parts with o-rings installed top and bottom (note these lower o-rings seal the injector adapter to the lower plenum and are not included with competitors products). Metal parts are machined from stainless steel. Boss for fuel temp sensor Earth clip for fuel temp sensor comes pre-installed opposite the boss Phenolic block mounts have been replaced with black anodized aircraft grade aluminium mounts Pic of the rails installed with ID1000. These rails will suit ID 1000, 1300 and 2200cc injectors which are needed for making big power with E85. You can order injectors through RGS Performance, or if you plan to source your own please let me know so as I can make sure you get the right length to work with your rails. All bolt on rails ship with fuel rail assembly, viton o rings, ARP fasteners, clamps, adapters, -6 adapter fittins, fuel temp sensor and ground wire. You will need to make small modifications to upper plenum, balance tube and throttle cable bracket, these are covered in the instructions that are sent with each kit. Thanks for looking
