QLD My Massive Sale Part 2 - Blitz/UAS/Z1/Turbosmart/Engine with goodies

Done some digging

 

ok nice. Bit of a stillen and kaminari mix. I like the kaminaris, so perhaps ill have to sway the financial minister to allow me to get these...

these were glass werent they chris? fit fairly well?

 

Yep, they are glass. I will chuck them on the car on Sat and take a picture for you.

 

Chrispy

I,ll take the BOVs and the AFM, I will pm you.

 

Do you have the little black box (stop/tail light sensor) that the tail lights wiring loom plugs into that is located down in the right hand corner of the boot behing the interior boot liner panel.
The dimensions of the black box are 80mm long x 40mm wide x 25mm deep.
cheers
Paul

 

Thanks mate, highly appreciate that. Will look forward to figment photos. Feeling pretty keen on these. :zlove:

 

Hi Paul, I'm not planning on stripping the zed to that level. The plan currently is to remove all modifications and running gear and sell the car as a near complete rolling shell for someone to turn into a race car/rebuild/engine conversion.

 

Thanks Chrispy. Do you happen to know of anyone else who is wrecking a 300zx in Brisbane, either private or a wreckers? thanks Paul

 

The apexi power intake, (I forget the forums options aren't threaded for some people)

 

OK.

Spoken for, but as yet unpaid:
ECUTalk
Apexi pod
AFM
BOV's

Sold
Turbosmart FPR - will be posted this morning.

Everything else still available

 

You still have got my interest regarding your skirts, once you take a loving shot of them for me

 

Yes, how rude of me. Will take some photos this afternoon. Been putting it off with this crap weather we have here

 

Lol, no worries mate. When you get to it. Just hoping if they work out well I can get them to paint on the car. As I'm pretty much ready to lay paint.

Thanks mate.

 

Make an offer, all this crap is no use to me.

Engine is now out of the car along with some of the other stuff. Will put it up when I get some time.

Any interest in the engine at all? Or should I part her out?


Piccies of the skirts. I only put the screw in the front, practically clip on. Fit very well.

 

Pm incoming mate.

Appreciate your time and assistance in arranging some pics.

 

Moooooaaaaarrrrrr!

Had a productive day, more piccies and things for sale

Out of the above stuff for sale the following is still available:

*Side Mount Intercooler boost hoses - black 4 ply silicone - Now $70!
*UAS Side Mount Intercoolers (Bar and Plate) Now $280!
*S2 PTU Now $50!
*TT Motor $5500. Happy to discuss removing parts to reduce the price. PM me to discuss. Engine is now out of the zed and on the stand.



New things!!!



Custom 2+0 exhaust. 304SS, 2.5" mandrel bent. Twin in twin out magnaflow centre muffler with two 14816 at the end (the best Magnaflow's for a zed IMO ). Magnaflow 2.5" cats, can't recall the CPI, but are marked as CARB compliant. To suit 3" Toyz dumps, but could be easily adapted to standard or other dumps by any reasonable exhaust shop. Some of the welds are average as I did them, and some are excellent as they were done by a TIG expert

$800. No I won't install it for you.







Sounds like this Clicky. May need V8 to sound exactly like that

NA Manual 5 Speed Gearbox. Rebuilt ~3,000k's ago. Synchro's are perfect and due to me not being able to keep the same engine in a car for long the oil has been changed about 4 times. Can be used on a TT (near as makes no difference the internals are the same to a TT 'box) with some minor grinding of the bellhousing and a 3mm spacer plate under the starter. Includes the starter and all sensors. $1000



JUN Lightweight forged CR-MO Flywheel for NA. 6.8kg vs 9.7kg for standard. I've owned this since brand new. Always used with a brass button clutch and have had no issues with it, smooth engagement which I put down to the CR-MO. I've been running it behind my TT (and the VH45 before that). Also includes some near new clutch cover bolts and washers. Ring gear is perfect and the mating surface is nice and flat. I paid over $400. $250 just for you as I'm a good bloke like that





Exedy Brass Button 5 Puck Clutch (NA). Ran this behind my VH and TT with no slippage. Always worked like a champ. Incredibly smooth for a brass button, better than some cushioned button clutches I have driven. The friction disc is getting a bit thin, about 1mm till it reaches the rivets. Double sprung centre. Probably worth chucking in a new friction disc. Pressure plate is nice and flat, no gouges or anything weird. Usual discolouration.

$100.





PZP Front Camber Arms. Usual Midori style arms and includes the chassis brackets. Threads are nice and not bound up. I removed when chasing a clunk in the front end (wasn't these, couldn't find it...)

$100



Black Silicone Radiator Hoses (TT). 4 ply, black etc, etc. Comes with hose clamps. Bajillion times better than crappy rubber ones.

$50



Standard TT ECU. Not socketed. I'll check later if it's for a Auto or Manual.

$150





Near new inner and outer front steering tie rods. Was about $400 from Coz $200 for you as you're my mates and they have some minor surface rust from being sitting on the shelf for 2 years. These were installed on the car when it had the depowered PS rack for the V8. Probably did ~50ks, if that.



Copy Stillen Nose Panel with OEM Brackets. Holes not cut out. $75



Aerocatches. Black, not lockable. Red anodised pins. Brand new out of the box. $75



2+0 NA Manual One Piece Driveshaft. Nice smooth uni's, no vibration issues. $250


Brand new Kuruma Z 2+2 window moldings. Windows and 1/4 windows. A must if you are doing a respray, finishes it off well $200



Whiteline Swaybars. Front and back. Front is an adjustable blade type. With good condition urethane bushes to suit. Flattens out your zed through corners. Will fit 2+0 and 2+2. Some of the paint is coming off in places. $250



Ebay Spec Ally Radiator (TT). Big core, worked well. Includes drain valve and rad cap. $120



SARD Attack Meter. Fancy speedo, tacho, 1/4 mile/0-100/0-200 timer and other stuff. Will get rid of the speed limiter in standard ecu'd zeds. Includes original box and manuals. $550 new $150 for my mates





Goodridge Rear Braided Brake Lines. Firms up pedal feel and stuff. I bought them coz they were shiny. $50




Non-oem cam and front crank seals. $20



OS Giken Twin Plate Clutch (TT). Flywheel is in immaculate condition. Friction discs are down to 2.7mm and 3.1mm. Would recommend replacing them, but everything else is in good nick. NPC can sort you out with the parts. Doesn't have the throwout bearing carrier, and I'm unsure if this uses the OEM carrier. $200





More to come!! Coilovers, Brembo's, Boost Controller and other stuff I dig up in the shed. Hopefully tomorrow/Monday

 

This is all well and good.

You do not have my permission to leave the Zed world entirely. What is your current Z project?

 

It's kind of a zed Still don't know what I want to buy yet.

 

That is the gayest thing ive ever seen

 

Pfft. You need to get out more.