I've taken out my passenger headlight as the low beam adjustment wasn't working properly. I know it's not due to the gears being broken because I replaced them with metal ones a few years back now and they seem to be fine. I bought a spare headlight (thanks RZM!) to swap the low beam projector into my headlight. I 've pulled both lights apart but for the life of me can't work out how to do the actual swap. It seems that to get the low beam projector out you have to unscrew the 3 screws holding black bracket in place. But one of the screws is obscured by the high beam projector. Do I take this out first? And if so how?
Try one of these: http://search.supercheapauto.com.au/search?w=flexible+screwdriver&look.x=0&look.y=0
You have to take out the high beam projector by slowly winding the two adjusters out. Eventually the ball joint the projector pivots on will pop out of its plastic retaining recess. Then keep winding the adjusters out.
