AUS Garage sale continued

***sold***

ConceptZ silicon oil cooler line set. Please not two sets pictures, only one set for sale. $75



***sold***

ConceptZ silicon power steering suction hose (J Hose) for Twin Turbo $28

 

Polished intake valve covers. Off my car, no longer needed.

$150

 

Brake Master Cylinder Rebuild Kit. OEM. $70 delivered

 

Silicon lines sold.

The following parts still available

Fog light
Door switches & harness
Spark plugs
Harness connectors
ACL Road and Main Bearings
Full Flow Oil Cooling Kit
Master cylinder rebuild kit
Polished valve covers

 

***SOLD***

TT fuel pump hanger for 2+0. Free. You can pickup from Berowra or I can post at your expense.

 

***SOLD***

Z32 manifold with sixth runner swap done. Was a very expensive process for me getting the internals port matched etc and the new runner TIG welded in. Welds have been smoothed on the visible surfaces and left on the underside for extra strength.

In addition the upper fuel rail mounts were removed, filled, and file finished, and the whole lot has been smoothed and sand blasted ready for powder or ceramic coating.

I was intending to use this on my motor but have since gone a (much) more expensive aftermarket route. Selling for a fraction of what the work cost me. I was intending to use this with BDE rails and can include a matching modified balance tube if needed.

$500

 

Working tacho and fuel gauge. $15ea. Can post.

 

ACL bearings sold. The following parts still available -please see thread for pics. Reasonable offers considered.

Stainless coil pack fasteners set $10
Fog light price dropped to $40
Spark plug set $50
Connectors -now $6ea plus $3 postage for one or as many as you like
Window switches & harnesses $400
NA radiator hose $28
Timing cover bolt set $10
Freeze plug set $30
Washer nozzle check valve $20
Polished valve covers $150
BMC rebuild kit $70
Runner swapped intake manifold, will throw in a balance tube modified for BDE top feed rails $500
Tacho and fuel gauges $15ea

 

***SOLD***

Working 300zx Twin Turbo fuel pump. Good for TT conversion or cheap way to replace a failed pump.

$50

 

Freeze plugs sold.

Still have

Stainless coil pack fasteners set $10
Fog light price dropped to $40
Connectors -now $6ea plus $3 postage for one or as many as you like
Window switches & harnesses $400
NA radiator hose $28
Timing cover bolt set $10
Washer nozzle check valve $20
Polished valve covers $150
BMC rebuild kit $70
Runner swapped intake manifold, will throw in a balance tube modified for BDE top feed rails $500
Fuel pump $50

 

***sold***

Series 1/2 PTU adapter harness. Genuine Nissan harness in as new condition.

$40 delivered.

 

ARP L19 head studs. New never fitted, no longer needed for my rebuild. Will allow heads to be torqued down to 110lb/ft to prevent lifting with big boost. 230-260ksi tensile strength exceeds ARP 8740 and ARP2000 Series Studs.

$550

 

***SOLD***

300zx Air Control/Regulation Valve Set. Includes AAC/FICD and Air Regulator Valve. All bench tested and confirmed to be operating at FSM specs. See vids for testing.

Off my car but no longer needed due to upgrade to Ash plenum.

$150/set.

 

Plenum sold
PTU harness sold
Air regulator set sold
Timing cover bolt set sold
Fuel pump sold

The following still for sale

Stainless coil pack fasteners set $10
Fog light price dropped to $40
Connectors -now $6ea plus $3 postage for one or as many as you like
Window switches & harnesses $400
NA radiator hose $28
Washer nozzle check valve $20
Polished valve covers $150
BMC rebuild kit $70
L19 head studs $550

 

Fog light dropped to $18

 

Targa top trim bolt/seal bits -set.

As pictured 2x outer packing, 2x outer seal packing, 2x outer lower packing, 2x targa top bolts. Good for anyone renewing targa seals or stripping parts for paint and wants to reassemble with new bits. Or to replace old perished rubbers.

$20USD worth on concept z; I’ll settle for $13.00 delivered to AUS. Parts are brand new in Nisan bags, they came in a box of spares I bought and are no use to me.

 

Fog light sold. Remaining parts below

Stainless coil pack fasteners set $10
Connectors -now $6ea plus $3 postage for one or as many as you like
Window switches & harnesses $400
NA radiator hose $28
Washer nozzle check valve $20
Polished valve covers $150
BMC rebuild kit $70
L19 head studs $550
Targa seal bits $20

 

Smithys place Polished IACV/AAC feed kit. Replaces the factory tube and hose assembly with something much more aesthetically pleasing. Hoses are quality SFS three ply silicon and the tube is show polished stainless steel. No longer needed on my car.

 

valve covers dropped to $120.

View attachment 1539 View attachment 1540