Fog Lights from Coz

Discussion in 'Non Technical' started by BigCol, Dec 20, 2016.

  1. BigCol

    BigCol That's what she said...

    Just a query - I'm after a new passenger side fog light including the rear housing.

    I was looking at these:

    LHD LH
    LHD RH

    I spoke with one of the guys from ConceptZ who advised that they believed there are differences between LHD and RHD foglights and did not think they would fit a RHD zed.

    Can anyone shed some light on whether this is correct or not?
     
  2. rob260

    rob260 Administrator Staff Member

    US have the parkers & indicators in the corner lights and just the fog lights in the front.

    JAP have just indicators in the corners and parkers & foggies in the front.

    The fog lights will fit but you'll have a two pin connector on the light side and three pin on the body side (easy fix) and you'll need to work out what to do with your parkers. I suppose you could order matching US Spec corner lights and do a little re wiring to suit.
     
  3. TWIN TERROR

    TWIN TERROR Well-Known Member

    I fitted the U.S fog lights to my J.D.M Zed years ago. It's that long ago I'm not 100% sure how I did it but I think I just drilled then filled the globe mount slots for the parker globes in the same spot as the original ones into the U.S ones. It was easy and they look original. Got them from Coz.
    Cheers
    Dave
     
  4. BigCol

    BigCol That's what she said...

    Thanks Rob. I had bought new front fog light lenses from Coz a few years back and so my lighting set up was as follows:

    [​IMG]

    Due to a minor traffic incident my passenger fog light now looks like this:

    [​IMG]

    [​IMG]

    I'd just buy the front lenses again, but the rear housing has been completely destroyed also.

    So given all that, you're saying that the unit would fit and it would just be a case of sorting out the wiring?
     
  5. BigCol

    BigCol That's what she said...

    Cool. It sounds as though the Coz guys were talking about wiring fitment rather than physical fitment. In that case it sounds like I just need to buy the LHD LH side unit and modify as required.
     
  6. rob260

    rob260 Administrator Staff Member

    looks like you're already running US Spec fogs and indicators -I think you'll be ok with the part from coz
     
  7. BigCol

    BigCol That's what she said...

    Thank Rob. So am I correct that it's the LHD LH fog light I need to order?
     
  8. rob260

    rob260 Administrator Staff Member

    Yes I think so
     
  9. BigCol

    BigCol That's what she said...

    Cheers!
     
  10. rob260

    rob260 Administrator Staff Member

    No probs good luck
     
  11. ADAMZX

    ADAMZX 2000spec Conversion

    Never seen that fog light setup before with the globe cover. Must be as rob said a usdm fog light. If you are chasing a second hand option ive got jdm fogs i could sell you if your interested. Sorry to here someone hit you col. Hope you get it fixed soon.
     

Share This Page