Z32 ECU Pinoutn

Discussion in 'Technical' started by _Robbo_, Jul 26, 2020.

  1. _Robbo_

    _Robbo_ Active Member

    Messages:
    935
    Likes Received:
    0
    Trophy Points:
    36
    Hey All,
    Need some advise; running a s2 (1996 I believe) motor with a S1 ECU, and S2 Loom which came with the motor.
    Had some electrical issues specifically with the AFM. Decided that i would order a bunch of new connector to not only freshen it up, but resolve any other issues as pieces were falling apart
    Now i had this down to a broken wire in the loom somewhere but after investigation it looks like it may not be.
    but i have realized that there are some wiring differences between the looms.
    Should i be following the S1 ECU pinout; and thus redo the wiring to match?
     
  2. beaver

    beaver southern zeds

    Messages:
    5,749
    Likes Received:
    45
    Trophy Points:
    48
    Location:
    yarra valley
    Should i be following the S1 ECU pinout... yes. the s2 loom wont have connectors for the vct egr and some other stuff but the pinouts should be the same afaik.
     
  3. _Robbo_

    _Robbo_ Active Member

    Messages:
    935
    Likes Received:
    0
    Trophy Points:
    36
    Cool, looks like I'm gonna dipin it all and go from there aha
     

Share This Page