August 14 QLD Tech day at the hoods

Discussion in 'Coming Events' started by oohogwash, Jul 28, 2016.

Thread Status:
Not open for further replies.
  1. oohogwash

    oohogwash Member

    Its on again - a tech day at the Hoods.

    Come one come all and have a ball, bring broken zeds or bring some beers - you know that you're all welcome here.

    Here is a post event thread from a previous tech day.

    The date is August 14, from 11am onwards. Location Ormeau, Exit 45 on M1. Exact details available on request.

    Let us know if you are intending to come along and post up what you are interested in or want fixed and the time you are coming so people know what to allow for.
  2. oohogwash

    oohogwash Member

    Let us know by reply if you are coming, we need to arrange stuff for the day.
  3. black baz

    black baz black 'n blue Bazemy

    Gavan ... I am in and am planning to have a Plenum pull done with the main purpose of replacing the two half moon seals .....

    This is a significant job and I am wondering whether an 11 AM start might be a bit tight ... ??? (dark by 5:15PM)
  4. black baz

    black baz black 'n blue Bazemy

    Guys and gals ... who is coming .. and what are you planning to do to your machine .... ???

    Gav ... any thoughts on the start time .... ???
  5. BoneZx

    BoneZx Active Member

    Come on people get on board. These are always great days to meet people and have a good time.
  6. 90TTZ

    90TTZ Back From The Dead

    If you're bringing the Chardy Baz, I'll be there:)
  7. black baz

    black baz black 'n blue Bazemy

    Done deal, Karl .... !!!!

  8. B-Line

    B-Line Older junior member

    Tech day

    We will probably try to come and meet you all, nothing to be done really but I would like a 2nd opinion on a vibration issue, and maybe if there is someone who can cast an eye/ear over my tuning would be good.
  9. oohogwash

    oohogwash Member

    Fantastic, have a few beers, bring some nibblies and talk all day :)
  10. larlok

    larlok Member

    Ill try to be there always good to meet new people
  11. MagicMike

    MagicMike Moderator Staff Member

    Hopefully I can at least make an appearance.

    I will have some forum lanyards for sale!
  12. Mr G

    Mr G Active Member

    Won't be able to make it this time unfortunately. :( I'm sure it'll be a great day, as it always is!
  13. Sketchy

    Sketchy Sick to the power of rad

    Is a complete motor install too much to ask on such a day? Would be awesome to have at least one zed on the road and driving but would be a mega mission!
  14. MagicMike

    MagicMike Moderator Staff Member

    Depends where you want it installed
  15. black baz

    black baz black 'n blue Bazemy

    GAVAN ... did you see my above post regarding the start time ... ???

    Any chance of a 10:00am start .. or earlier ... Plenum pulls et al are time consuming jobs ... and a need to cater for hiccups and the like ....
  16. 90TTZ

    90TTZ Back From The Dead

    Baz, what does your list look like for parts and consumables to do the work you need done? I guarantee you, the only thing that will hold you up is forgetting something you need to do the job. Plenum pulls on an N/A is fairly straight forward.
  17. scottyoz1962

    scottyoz1962 Active Member

    I'll be there, only fiddly bits to fit like gauge rings etc. So will be available to help others where i can.
  18. oohogwash

    oohogwash Member

    Just let me know the time, not a problem for earlier start
  19. oohogwash

    oohogwash Member

    had the pump go on my air compressor, trying to get it fixed but no guarantees, can someone bring a compressor to run air tools ?
  20. oohogwash

    oohogwash Member

    If you have tools please bring them, and keep them in a known location so they dont get mixed up with mine :)
Thread Status:
Not open for further replies.

Share This Page