Alloy Engine Splash Shields

Discussion in 'Group Buys' started by rob260, Jul 8, 2010.

Thread Status:
Not open for further replies.
Page 1 of 7
  1. rob260

    rob260 Administrator Staff Member

    Laser cut alloy engine splash shields, these replace your worn OEM plastic shield and add some bling to your car.... Made in AUS by Unique Auto Sports from 1.6mm alloy with anodised silver finish. Mounts as per OEM shield, using hardware supplied (see picture on left). Yes they can be supplied in unfinished alloy but they won't look polished for long! I would only suggest buying an unfinished version if you plan to have it powder coated or anodised yourself.

    Shot of the splash shield in unfinished alloy on left, example of silver anodised finish on right

    [​IMG][​IMG]​
    Price: $170 for ten or more
    Freight: $45 registered and insured, Australia wide OR pickup fron Seven Hills in Sydney.
    Timeframe: The group buy will run until 15/8
    How to Order: To confirm your order I will need a 50% deposit up front, and we can start production on these as soon as ten orders are confirmed. Once we are in production your deposit becomes non-refundable, unless for any we are unable to complete the buy. Deposits will be refunded if we are not able to proceed (for any reason) by 15/8. Freight and the balance of your order will be payable to me within two weeks of being advised these are ready to send or your deposit will be lost.
     
    rob260, Jul 8, 2010
    #1
  2. Adamness

    Adamness Active Member

    I have the splash shield on the right exactly like that, I havn't fitted it yet though, are both the ones shown meant to be fitted together or are they simply 2 different types shown to show the different finishes.

    Any pics of these installed would be great

    Cheers,

    Adam
     
    Adamness, Jul 8, 2010
    #2
  3. rob260

    rob260 Administrator Staff Member

    The tray on the right is to run from an FMIC to the radiator support, just used to show anodised finish in this case. The tray on the goes behind it, I don't have any installed pics but guarantee they will fit or money back
     
    rob260, Jul 8, 2010
    #3
  4. ZeDHeD

    ZeDHeD Well-Known Member

    Yeah put me down as a strong EOI at this stage! Thanks Rob!
     
    ZeDHeD, Jul 8, 2010
    #4
  5. Stef

    Stef Active Member

    Have you got rid of the 2 mounts on vertical bars on the sides of the shield ?
     
    Stef, Jul 8, 2010
    #5
  6. Stufarny

    Stufarny Stuart

    So the price is $170 for a set?

    Stu
     
    Stufarny, Jul 8, 2010
    #6
  7. rob260

    rob260 Administrator Staff Member

    Group buy is for the lower engine shield on the left only and these are $170 each. The undertray on the left is for use with front mount intercooler and is pictured only to show the silver anodised finish only.
     
    rob260, Jul 8, 2010
    #7
  8. Adamness

    Adamness Active Member

    Fixed...lets not confuse everyone even more ahaha

     
    Adamness, Jul 8, 2010
    #8
  9. 23BIGA

    23BIGA Still CruZin' +Parts4Sale

    Rob, Count me in....

    Alloy Engine Splash Shields as below but in anodised silver finish..

    [​IMG]

    1. 23BigA
    2.
    3.
    4.
    5.
    6.
    7.
    8.
    9.
    10.
     
    23BIGA, Jul 8, 2010
    #9
  10. Felix

    Felix Custom User

    My splash shields have long become extinct before I got the car, where exactly does this mount? from radiator support bracket to engine and not any further forward? Because I'd like to have something to protect the pods from water underneath
     
    Felix, Jul 8, 2010
    #10
  11. rob260

    rob260 Administrator Staff Member

    Hi Stef, those vertical edges are still there but the mounting points aren't there. They aren't required the shield is quite stiff and secure due to the thickness of the alloy.

    Here's a pic showing the other side

    [​IMG]
     
    rob260, Jul 9, 2010
    #11
  12. rob260

    rob260 Administrator Staff Member

    That is correct. OEM setup has another plastic shield that runs from the radiator support to the front bar. If running FMIC I can probably organise one of the alloy ones to run from radiator support to FMIC otherwise you might need to shop around second hand for a plastic shield to run from rad support to front bar.

    I used to have one floating around will check the garage and get back to you if I still have it.
     
    rob260, Jul 9, 2010
    #12
  13. rob260

    rob260 Administrator Staff Member

    1. 23BigA
    2. rob260
    3. ZeDHeD
    4.
    5.
    6.
    7.
    8.
    9.
    10.
     
    rob260, Jul 9, 2010
    #13
  14. WYKKED

    WYKKED <b><font color=red>2 Much Trouble</font></b>

    Put me down for one, and it bloody better fit.
     
    WYKKED, Jul 9, 2010
    #14
  15. Adamness

    Adamness Active Member

    Found this in your garage rob, might be useful

    [​IMG]
     
    Adamness, Jul 9, 2010
    #15
  16. rob260

    rob260 Administrator Staff Member

    Are you running FMIC? If yes then one of these trays (IC to rad support) would be perfect for you and I can probably arrange one...
     
    rob260, Jul 9, 2010
    #16
  17. Adamness

    Adamness Active Member

    Oh i already have one of those mate as mentioned above, i think i got it off you, left over from last gb on them. Just saw that pic so everyone can clearly see the 2 different splash guards. As there were lots of questions about where each one goes :)

    I may get one of these other splash shields aswell like urself but I have to see how much money I get from the tax man etc first
     
    Adamness, Jul 10, 2010
    #17
  18. mr zed x

    mr zed x chassis scrubbin..

    im down if it is from rad support to engine. NOT fmic to rad support.
    i need to prtect the sump, ride height is smashing it up lol.
     
    mr zed x, Jul 10, 2010
    #18
  19. rob260

    rob260 Administrator Staff Member

    Cool yeah that is the one the buy is for -rad support backwards
     
    rob260, Jul 10, 2010
    #19
  20. rob260

    rob260 Administrator Staff Member

    1. 23BigA
    2. rob260
    3. ZeDHeD
    4. WYKKED
    5. mr zed x
    6.
    7.
    8.
    9.
    10.
     
    rob260, Jul 10, 2010
    #20
Page 1 of 7
Thread Status:
Not open for further replies.

Share This Page