AFM sensor connector

Discussion in 'Technical' started by Blipman, Mar 15, 2010.

  1. Blipman

    Blipman Beer hooves totally work

    How do the pins in the AFM sensor connector (on the loom, not the sensor itself) come out? I have one where the wires have pulled out of the little crimped pins in the connector, but I can't get the 4 bits of metal that are crimped onto the wires in the connector to come out. I thought they either push out the front or out the back, but I can't get them to budge. What am I missing?

  2. tony321

    tony321 Member

    The pins have a little cutout which bends and locks in place when inserted so you need bend them back flush with the pin with a very fine flat screwdriver. It then comes straight out.

Share This Page