AEM Wideband Uego/AEM True boost controller/AEM Boost Gauge

Discussion in 'For Sale by Businesses' started by The Devils Z, Jan 5, 2007.

  1. The Devils Z

    The Devils Z New Member

    I don't know if with shipping the price is cheaper than local Australia vendors, but I figured I'd share. Shipping will be much cheaper if more than one is packaged together.


    All prices USA ... shipping to Australia add $50 ( 4-10 day delivery )

    AEM True Boost Controller - $275
    AEM Wideband Uego - $275
    AEM Boost Gauge - $185


    [​IMG]


    AEM?s TRU-BOOST Gauge-Type Controller is an electronic boost controller that combines the simplicity of a manual boost controller with the added ease of adjusting boost levels through a gauge interface. There is no external interface required for set up, and it is fully functional right out of the box. There are no gimmicks or special software programs included. If you want more boost press the button on the right of the gauge face, and if you want less boost press the button on the left of the gauge face. It?s that simple, and IT WORKS!

    AEM?s TRU-BOOST Gauge-Type Controller includes everything you need, including an on-board 29 psig pressure sensor, built-in Overboost protection with two timed shutdown levels, a scramble boost setting and a low-side output for a warning light. AEM offers a 75 psia boost sensor for high boost applications (sold separately).

    AEM?s boost control solenoid (included) is the only one specifically manufactured for automotive boost applications, which means it won?t corrode and stick from exposure to rich fuel mixtures, it is pressure tested to 100 psi and includes -4 AN fittings to eliminate any chance of leaks.

    No external interface required for programming!
    Complete system includes harness, boost hose, on-board 29 psig pressure sensor (external 75 psia optional), boost solenoid, gauge display and all necessary fittings
    Quick connect technology eases the installation process
    Two user selectable boost settings with peak boost memory
    Scramble boost setting allows user to momentarily change boost levels
    User selectable Overboost alarm includes two timed shutdown levels at 10% and 20% Overboost
    User configurable gauge includes 24 scalable LEDs, and interchangeable bezel, pin guide and faceplate to customize look of display
    One (1) low-side output included for warning lights

    msrp = $345.45

    Aem Power website


    [​IMG]

    A wideband UEGO sensor controller accurately monitors Air/Fuel ratios (AFR) during the tuning process to prevent a lean fuel mixture, which could lead to engine damage. AEM has combined its single-channel wideband UEGO controller and gauge display into one unit, uniting unsurpassed AFR accuracy and control with an easy-to-read interface. AEM?s Gauge-Type Wideband UEGO Controller features a digital LED display and sweeping LED ?needle? that changes colors as AFR changes from rich to lean. The unit?s 52mm (2-1/16?) gauge housing fits in most gauge pods and can be remotely mounted virtually anywhere.

    Ideal AFR monitoring tool for EFI and carbureted applications, and engine dynamometers
    Does not oscillate AFR reading like narrow band sensors
    No laptop required for monitoring!
    Bosch sensor included
    Accurate to 0.1 AFR
    Reads in AFR or Lambda via a switch in back of gauge housing
    24 Color-coded LED display lights provide immediate reference to engine?s air/fuel ratio (AFR) or Lambda ratio
    Integrated three-digit display reveals AFR or Lambda in real time
    User-programmable 0-5v analog output included for use with data loggers and virtually any engine management system
    Serial data stream included for output of AFR (RS 232)

    msrp = $349.41


    AEM Power website


    [​IMG]


    [​IMG]


    AEM?s digital Boost display gauge delivers unsurpassed accuracy and visibility. Each gauge includes 24 color-coded (Red, Green, Yellow) LED lights that change from green to yellow to red for immediate reference to the measured parameter, and an integrated thee-digit display that reveals real-time operating conditions.

    AEM?s digital display gauges feature a standard 52mm gauge housing that fits in most gauge pods and can be remotely mounted virtually anywhere. Each gauge includes interchangeable silver and black bezels and black and white faceplates to personalize the look of your gauge?it?s like having four gauge designs in one!

    Includes easy-to-install harness and sensor
    Complete stand alone gauge requires no additional sensors or programs to operate
    Ideal for both fuel injected and carbureted motors
    LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions
    Includes 0-5V analog output for routing to engine management system or data logger
    Easy to read faceplates/displays are designed to complement existing AEM gauge styles
    Included bezels and face plates allow you to personalize the look of your gauge
     
  2. ZX2NV

    ZX2NV Z Racing Evolution

    Damn it

    Thats some pretty good pricing I was looking at these but just got my PLX ones about 2 weeks ago just before chrissy. If I only knew:D :D

    Good job bringing all this cool stuff to our far away shores

    Cheers

    J
     
  3. The Devils Z

    The Devils Z New Member


    No problem ! - I have shipped to AUS before. I just have no idea how competitive the pricing is for you guys with shipping ... send me a PM if there is anything I can do !
     
  4. ZX2NV

    ZX2NV Z Racing Evolution

    Its pretty good shipping wise would be better though to ship a few sets together.

    The problem is out here not a lot of members realise the benefits of fitting good quality wideband 02 sensor kits to there cars. Its a shame as most would discover problems they didnt know they had.

    Cheers

    J
     
  5. The Devils Z

    The Devils Z New Member

    this is soo true ... soo true ..
     
  6. Red Dwarf

    Red Dwarf Long term Zed Owner

    I am really interested in the boost controller

    I just want to know does this boost controller do away with the need for a boost gauge ? or does it just display the setting ?
    Cheers
     

Share This Page