2000 model Front Bar Kit $ 625

why not update the look of your early model Z32 front bar to the 2000 model
with this OEM front bar kit. The front bar is made from durable urethane and
will stand the test of time with a limited lifetime warranty, the kit includes the
parts as listed below. New indicators are provided as the older style are larger
plus contoured differently and will not fit into the 2000 model bar. The bar fits
direct to the older models, the kit includes the following;1 x 2000 model front bar
1 x LH bar lamp/indicator
1 x RH bar lamp indicator PLEASE NOTE: grill mesh is NOT included, you can pick up coloured mesh for
around $ 40.00 from most retail auto suppliers. The group buy requirements
are listed below, should you have any queries please post within or contact me
on 0418 41 22 41, email info@ttzed.com >>> CHEERS SIMON<strong>Quantity Required:</strong>&nbsp;&nbsp;&nbsp; 10+
<strong>Payment:</strong>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;COD, money order or credit card
<strong>Terms:</strong>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; 50% deposit at GB cut-off date, 50% at date of dispatch
<strong>Int'l Shipping ETA:</strong>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;12 weeks from date of order (GB close-off)
<strong>Shipping Costs:</strong>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; VIC, SA & NSW&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; $ 70.00
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;QLD&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;$ 85.00
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;NTH QLD, NT& WA&nbsp;&nbsp;&nbsp; $ 98.00<strong>HOT PRICE $ 625.00 - NOT EXPECTED TO BE REPEATED</strong>[image]http://www.cat6e.com/ttzed/gbuy/2000_groupbuy.jpg[/image]<BR>

 

How Long has this price

Been available, only a few weeks ago myself and Z-ster forked out $875 each for the group buy he organised through TTZED.
Now $250 cheaper :?)
I know we were only two not ten, but if we had known this price was just around the corner we certainly would have waited.:N(

 

ONLY confirmed this week >>>

due only to a new business contact made in the last few weeks, as such I had NO
way of knowing this group buy would occur. Ron I understand your frustration at the
significantly cheaper price now offered as both you and John purchased in March with
delivery in April. John had the group buy up for some time and you guys were the only
2 participants (we needed 5) it was done at the best price I could do. On the plus side there will be other group buys with similar discounts for OEM Nissan
parts. If any member has suggestions please advise me at simon@ttzed.com.
>>> CHEERS SIMON

 

Count me in!!! :YD (n/m)

N/M

 

Yep Yep Yep

Definately be in. Possibly even my dad as well. (red32)

 

Yep, me too Sime....

Been wanting one for a while, and since Ben wont sell me his, now is the time..Cheers

 

Very interested>>>

matty_@iinet.net.au

 

Instrested

can urethane be trimmed, to fit a fmic? Can local guys pic up at the show room or is there still same postage price applied.

 

Pat, yes can be trimmed for a FMIC >>

you could use a number of tools to achieve this, although it is important that make sure
that you dont take too much off in critical areas that may be necessary to hold the form
/shape of the bar. Of course NO shipping would be applicable if picked up from our
showroom >>> CHEERS SIMON

 

i'm in can also pick it up

8D kbenk@optusnet.com.au

 

2000 Front Bar..>>

Hi Simon,Confirming phone call - Yes please. Just one kit for the moment.Cheers

 

Kool i'm in then (n/m)

N/M

 

Count me in Simon

Call me on 0411 350 123 to confirm, Thanks.

 

Put me down for one, thanks Simon

I didn't see a date for finish of group buy. Will it just be when you have the numbers?

 

Caroline we should have the numbers soon >>

maybe in a few days if not today. To give other members a chance to see it, I was thinking we may leave it open for week or two then close off. Does anybody have any suggestions or comments on this, please advise/ post. >>> CHEERS SIMON

 

Hey Simon.

I need to be sure that a fmic will fit under there and allow airflow to the top tank also. If you find out any info on this could you please let me know because I am interested in a front bar.Cheers,
Ryan.

 

Hi Simon, one for me please:-Z

Thanks for organising the great price:-Z

 

Yes Please, 1 Please !!!

Any suggestions on a spray painter in the ACT ??? IB, ZCAR91 - would be happy to fall in with you if you have someone in mind - might be able to get a discount on this as well! Are the indicator lights the ones at the outer edges. If so, are the front lights fog lights? Given my car's an Auspec NA, how do I get these. If not, how do I fill the bar's 2 sets of lights on each side? i.e. What goes where?Thanks for any help.cheers,Peter

 

there like bums now everyone has one8-} (n/m)

N/M

 

Hi Simon. Please count me in for 1 as well.

Cheers
Mark