Z32 Door not unlocking

Discussion in 'Technical' started by TordeK, Oct 24, 2021.

  1. TordeK

    TordeK Member

    Since changing the upper roller bolt on the window I’m guessing the door is sealing a bit tighter and now the door doesn’t unlock unless you apply pressure on the door before unlocking the door… is that the lock actuator plastic bit that needs replacing?
     
  2. ADAMZX

    ADAMZX 2000spec Conversion

    Could be a number of things. Id be checking the door lock barrel linkages from the barrel to the actuator inside the door are 100% correct and aligned properly. Ive experience a few times issues with the door locks not unlocking when the door is closed.

    Luckily for me, i managed to get the doors open again with alot of pushing and swearing but i have never had to replace the actuators ever.
     
  3. TordeK

    TordeK Member

  4. ADAMZX

    ADAMZX 2000spec Conversion

    Sorry i thought you meant the actual locking actuctors in the door that lock the door to the chassis frame.

    If you have the original plastic oem type ones then its possible they have just broken on you. The only way to know is to pull the door card off and check to see if its attached to the door lock barrel or not.
     
  5. TordeK

    TordeK Member

    Awesome thanks!
     

Share This Page