Z32 Front bumper lights

Discussion in 'Non Technical' started by Senna, Sep 14, 2019.

  1. Senna

    Senna Member

    Hi guys, was wondering if all the light work on the front bumper, currently my 2 inner ones turn on when i turn headlights on and have indicators in them. When i press the fog light button no lights turn on. The outer ones are currently there for decoration and do not turn on at all. It is an aus spec
     
  2. lidz

    lidz Well-Known Member

    The aus-specs don't have front fog lights, rather they have the rear fog light on one side of the rear number plate (the other side is a reflector).
     
  3. Senna

    Senna Member

    So the 2 inner lights are the lights that turn on when the headlights are on and are also indicators? The side ones are definitely blanks?
     
  4. lidz

    lidz Well-Known Member

    Yeah inner pair are Parker lights & indicators, outer ones are dummy indicators (these are the indicators on Jap models but weren't suitable to pass ADR's).

    Other members have fitted fog lights but you'll need an auto electrician to wire them up to the switch.
     
  5. NI85

    NI85 Active Member

    My car is JDM, so I wired it back to "stock" You can see the blinkers fine.

    Unlike some modern cars that have the blinker inset between the headlights. That are Hard To See: as you don't know that they are turning till they're directly pointing at you. Some don't even have the guard or mirror blinkers to help let you know.
    ---
    The "dummy" lights can have globes fitted. The twist lock portion is there. Just the light fitting blanks need to be cut out.
     
  6. Senna

    Senna Member

    Thanks guys, might not touch it wouldnt know where to start with wiring
     

Share This Page