Sparkblowout

Discussion in 'Technical' started by will300zx, Nov 28, 2016.

  1. will300zx

    will300zx Member

    Hi guys what spark plugs should I be using and what gap the car is running 19psi of boost and making 460whp but when the car hits full boost it's starts to drop out and in
     
  2. 90TTZ

    90TTZ Back From The Dead

    I'm running BKR6E at .8mm gap with 544HP at 24PSI.

    $4.50 plugs FTW!!!!
     
  3. SRB-2NV

    SRB-2NV #TEAMROB

    i run bcpr6es at .8mm at ~400whp and 15psi
     
  4. AAU54U

    AAU54U Member

    I'm running NGK BKR8EIX at .8mm gap and 23psi
     
  5. ltd

    ltd Linux Ninja

    Plugs

    I run ZFR7F at 19psi (~360rwkw). They are .8mm and exactly match the projected tip design of the stock PFR6B-11B but are one step colder and a good gap for boost. Available for $2.50 USD each on ebay; I buy 24 at a time and change them regularly.

     
  6. will300zx

    will300zx Member

    Thanks guys has anyone here run the PFR6B-11B with high boost and had any success
     
  7. brisz

    brisz Well-Known Member

    Yes
     
  8. rob260

    rob260 Administrator Staff Member

  9. will300zx

    will300zx Member

    How much boost are you running and what gap
     

Share This Page