NSW Aftermarket Z32 parts (updated with more daily)

Discussion in 'Car Parts for Sale or Wanted' started by mmarschall, Jan 6, 2013.

  1. mmarschall

    mmarschall 3.5 zeds in sheds

    Hi Everyone,
    will try to add at least one item per day to this thread till i run out of aftermarket goodies. :)

    1st up- Project Mu braided brake lines removed from 96TT, the rubber mounts on the front lines can be slid along to fit the location needed.
    $70/set (+$10 postage if needed)
    [​IMG]

    2- Complete set of solid rear subframe "collars" or bushes.
    Removed from the 95TT a few weeks back. Well made, no damage.
    $50/set (+$15 postage if needed)
    [​IMG]

    3- Genuine "PERSONAL OZ Racing" steering wheel (Italy) + OZ racing horn button also branded "personal-italy".
    Includes the mounting adapter and screws.
    Removed from 95 TT. Threads are all in good condition, not falling apart and is the "race" style wheel with approximatly 4cm deep "dish".
    $150 complete. (+$15 postage if needed)
    [​IMG]

    4- CF style stereo surround, coating is newly done in japan onto used items with a "scratch-proof" clear overcoat in high quality.
    This one includes the center strip, both top corner covers, and all mounting points intact. Center strip has both metal clips, main surround has the metal reo bracket backing it still fitted. no cracks or damage.
    Only for sale as my zed needs a double dinn surround!
    $150 (+$15 postage if needed)
    [​IMG]

    5- KENWOOD sub box. "Max Air Drive" KSC-SW2000 with inbuild amp (all in one style box 34x71x15).
    $200 (+$30~50(WA) postage if needed) Removed from 2+2 96 TT.
    [​IMG]

    6- GREDDy turbo timer + adaptor loom to directly plug in the ignition loom. removed from 96TT.
    $85 (+$10 postage if needed)
    [​IMG]


    Contact:
    Martin Marschall
    (02)66333131
    martin336@gmail.com
    Kyogle, 2474, NSW
     
  2. Zna

    Zna New Member

    I'll take the stereo surround. PM banking details and I will send postage details. Thanks.
     
  3. frysie

    frysie FRYTECH

    project mu brakelines? Aren't those a big japanese brand name over there??? damn if i didnt just pay my bills i would so get them.
     
  4. Jamie

    Jamie Jamie The Hobbit

    I'll grab the braided lines if nobody else has.
     
  5. mark

    mark mark

    brake lines

    seconds on the brake lines if Jamie pulls out
     
  6. Jamie

    Jamie Jamie The Hobbit

    Someone is already before me unfortunately...
     
  7. 2 Thumb's up

    2 Thumb's up Member

    i will take the Complete set of solid rear subframe "collars" or bushes.
     
  8. mmarschall

    mmarschall 3.5 zeds in sheds

    update 1

    Parts still available:

    5- KENWOOD sub box.
    6- GREDDY turbo timer + adapter loom

    New parts:

    7- CF cover stereo surround (this is a Japanese stick on CF style cover, hard plastic). Surround is in excellent condition with no broken mounts or tabs, the vents all work perfectly and are undamaged.
    Price $85 (+$15 postage if needed)
    [​IMG][​IMG]

    8- Gearknob, CF style, missing the top emblem (good for your custom badge?) few scratches, would come up well with the metal part polished. 400g feels heavy/solid.
    Price $10 (+$8 postage if needed)
    [​IMG]

    9- CD player/headunit Carrozzeria (PIONEER) DEH-P099 + remote control.
    Worked well in the 95 zed with very good quality sound. The only down side of JDM headunits is the FM frequency range is 76.1-89.9MHz. This means it only gets the bottom end of our range here. Its fine with my MP3 radio sender but not for most channels without plugging in a siginal converter ($15~). Found only this one for sale online http://www.nengun.com/carrozzeria/cd-deck-deh-p099-263952
    $ 150 (+ $20 postage if needed)
    See above photo as installed in the 95 - Comes with direct plug in for the 300zx.
    [​IMG]

    10- Single DINN Cup holder, slide out + lower tray drawer with non slip surface. See photo further up for looks when fitted.
    Looks ok but draw does not slide smoothly, cheap plastic. Comes with side mounting brackets to secure it in the dinn pocket location.
    The only reason to install this would be to be able to say "my zed has cup holders". other than that i think you could use it to spill drinks into your CD player under brakes...
    $10 (+$8 postage if needed)
    [​IMG][​IMG]

    11-CUSCO No. 220 473 AS (Price reduced!) Front adjustable rods.
    Excellent condition, straight, no play/slack but have been partially sprayed in black underbody paint at some point.
    I scraped a bit off on one of them and it can be removed if its an issue (take some time). $170
    [​IMG]

    Yes, i combine postage.

    Sorry to the above people who missed out on items already sold. :(

    more tomorrow. :)
     
  9. zed kelly

    zed kelly New Member

    ill grab #10- Single DINN Cup holder. pm sent.
     
  10. Moo

    Moo Shocking...

    2nd on cup holder :D
     
  11. reggie_young

    reggie_young New Member

    I got one moo :D
     
  12. mmarschall

    mmarschall 3.5 zeds in sheds

    Update 3

    Parts still available:

    5- KENWOOD sub box.
    6- GREDDY turbo timer + adapter loom
    7- CF cover stereo surround
    8- Gearknob, CF style, missing the top emblem
    9- CD player/headunit Carrozzeria (PIONEER) DEH-P099
    11-CUSCO No. 220 473 AS Front adjustable rods.

    New items:

    12: CF coated parts at japan cost price-
    Door handle surround $18/pair (+$8 postage if needed)
    Power window switch surround pair $35/pair (+$8 postage if needed)
    Please check the photo, one door handle surround has a missing clip + areas marked in pink
    [​IMG][​IMG]

    13: Very rare Japanese strut brace set: Front + Rear from 2+2. The leather covers wrap neatly around the rear bar and cover the hole in the tower. VERY solid quality braces.
    On a serious note, if you just want some bling, you can buy very cheap braces from ebay or even here on the forums sometimes.
    Price is $450/pair (+postage via courier if needed)
    [​IMG]

    Thanks for looking :)
     
  13. zed kelly

    zed kelly New Member

    ill grab a pair of each of #12 thanks mate !
     
    Last edited: Jan 11, 2013
  14. mmarschall

    mmarschall 3.5 zeds in sheds

    Update 4

    Parts still available:

    5- KENWOOD sub box.
    6- GREDDY turbo timer + adapter loom
    7- CF cover stereo surround
    8- Gearknob, CF style, missing the top emblem
    9- CD player/headunit Carrozzeria (PIONEER) DEH-P099
    11-CUSCO No. 220 473 AS Front adjustable rods.
    12- 1 pair of CF style handles only
    13- Brace set


    New Items:

    14- Genuine HKS spanner set for coilover suspension, a bit marked from rattling around in the boot but perfectly usable. May fit other types, have not tested.
    $20 (+$10 postage if needed)
    [​IMG]

    15- M's Airflow resetter (No, i dont know what its for either)
    $10 (+$8 postage if needed)
    [​IMG]

    16- GREDDY / TRUST Temp gauge with control module. (EXT. TEMP range = 4-12 x100 degrees C, with memory and reset buttons, warning and checklight)
    $50 (+free postage if needed)
    [​IMG]

    Thanks for looking :)
     
  15. 3clipse

    3clipse #TEAMROB

    2nd dibs on #12 only if Zed Kelly falls through.
    I will only grab it if I can take the door handles, and power window switches.
     
  16. Scruffz

    Scruffz New Member

    Hi Martin,
    I'll grab the HKS coilover spanners (#14) if you still have them.

    Also have sent youa pm to see ifyou haveanother part.

    Cheers

    James
     

Share This Page