BLACK BEAST BUILD Slicktop R-Spec

Discussion in 'Member's Garage' started by BLACK BEAST, Feb 22, 2010.

  1. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    been designing one in the last month (in my head) will put into motion soon .
    will be making one up with 12mm plywood to start with (about 100mm, paint it black) and see how it works ..
    eventually make it out of carbon/or aluminium

    you mean the bonnet where the rear section has been slightly raised?
    fibreglass is never perfect though :)

    with the spoiler on everyone with VTEC wants to race :p
    spoiler is literally 5mins (3 trim screws and 6 nuts)to put it on and off

    .
     
  2. Boost Junkie

    Boost Junkie Member

    im lovin it dude it looks kick arse.
     
  3. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Finally have some time over xmas .

    time to finish off the BEAST SUPER WIDEBODY .

    SUPER =the most proportional ,functional ,and factory looking kit .

    rear has been done ,now front SPL and front bar need to be modified .

    With wheels straight you can see how the front guards tuck back in to meet the front bar ..
    no good for function with big wheels !


    [​IMG]
     
  4. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    WARNING - not for the fainthearted

    STEP 1
    Cut bar and open it to width

    [​IMG]

    .
    .


    STEP 2
    cut outside of guard and spread it to width .

    [​IMG]


    .
    .

    STEP 3
    cut the guard section and bolt it back to original location onto the frontbar .
    then bandaid tack everything with fibreglass to hold into position.

    [​IMG]

    .
    .

    you can see how much clearance there is now

    [​IMG]


    .
    .

    REPEAT OTHER SIDE

    .
     
  5. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Here is the SUPER WIDE BEAST in first stage of completion .

    [​IMG]

    [​IMG]
     
  6. Jamie

    Jamie Jamie The Hobbit

  7. planetrobbi

    planetrobbi planetrobbi

    OMG. This is nearing EPIC status - how seriously mean does it look?


    [​IMG]
     
  8. ryanlok15

    ryanlok15 red zedder

    Just wondering with the widening, wouldnt the efficiency of your wing decrease? Might be wrong but I thought the wing had to be wider than the car to provide efficient downforce...please do correct me though

    Ryan

    Ps: looks awesome
     
  9. WhiteNight

    WhiteNight Littering and...

    Consider yourself corrected
     
  10. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    The wing size will provide a certain amount of downforce at a certain speed no matter how wide the car is .

    the wing is a lot bigger than it looks ..depending on camera and angle .1720mm
    ..body has to be at least 1860 -1870mm now

    [​IMG]
     
  11. beaver

    beaver southern zeds

    "wing is a lot bigger than it looks"

    really, it looks like a Cessna wing already, and is intruding into light plane air space, traffic control will be on your case for flying low. :D
     
  12. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Always wanted a private jet.

    I believe at around 280km/h with the wing adjusted upwards ,I'll get off the ground :p

    .
     
  13. beaver

    beaver southern zeds

    The

    rest of the car is a credit to ya, :cool:
     
  14. brisz

    brisz Well-Known Member

    Bravo Echo Alpha Sierra Tango please return to controlled air space !

    This is starting to look like a street driven time attack car. :eek: :br:
     
  15. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    well thats the objective of the build ..:)


    Z32 GT3 :p


    .
     
    Last edited: Jan 1, 2013
  16. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    Finished fibreglassing the inside of the guards and bar today .
    added 2 more layers on the whole width as it was too thin for my liking in that area .

    Removed the side indicators for a slicker look .
    (rear bar has had reflector shaved previously)

    [​IMG]

    [​IMG]
     
  17. Chad_

    Chad_ Well-Known Member

    holly shit that looks crazy :zlove:
     
  18. Full_Metal_Jacket

    Full_Metal_Jacket Got 2B JDM or Better

    Nice build! The black beast is looking beastly with the wide body kit.

    How hard was it to tune with the ethanol sensor? I'm told it can be a lengthy process.
     
  19. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    its still on the run-in tune on 98 pump .

    once I get ID2000cc injectors I'll tune for the fuel flex which consists of about 7 different maps ..98 - E15 - E30 - E45,etc up to E100 if I want .
    (I'll max out the ID1000cc on E85)

    .
     
  20. Full_Metal_Jacket

    Full_Metal_Jacket Got 2B JDM or Better

    Matt Pool, the owner, is a good guy at ID I have his 1200cc kit.

    2000cc's are huge and maybe difficult to tune with. What are your power goals?
     

Share This Page