Few updates: Finished the exhaust. Wasn't too happy with the rear section so made some changes. Mocking it up: [IMG] Also repainted the diff and...
Wasn't happy with the ground clearance of the exhaust, and the tips. So hacking it up I go. First mission was the dumps to the x pipe....
Not much left to do. Need to run some wiring for my AFR to the link , finish the exhaust, fiddle with the alignment and chuck the interior back...
Started mocking the exhaust up. Have some trick downpipes from @rob260 and his old system which I am modifying. Lining up the mid pipe. Stock...
Got it cleaned. Drove it for a short distance for the first time in years!. Felt ok. Power steering was leaking which I will need to address....
Got some new wheels. Might aswell while I'm there, plus some tyres. [IMG] [IMG]
Finally got my nose panel painted, with the bar too. [IMG] [IMG] [IMG]
Heres a pic with the new oil cooler setup. Plus I wacked some z1 intercoolers on it while I was there. [IMG]
I forgot to add, in the eternal parts purchases, got my hands on a 2k gearbox. [IMG] [IMG] Very excited to shift with my new shifter and new...
I had a short shifter on the car, always hated it. Found a stock shifter at great cost. Did a brass bushing plus changed the internal bushings. So...
Built a quick sensor loom. Running bosh pressure/temp sensors for oil and fuel, and the polar engineering MAP/iat sensor. [IMG] Its very well...
All the lines ran. Ended up running past the alternator, and against the frame rail. Then for the cooler just made these little hoses. Works...
View under the car, ignore the jacked up rad support : - ( Nice and easy without spilling oil everywhere! The reason I did this was wanting to...
With front bar installed. [IMG]
Before I post the BOV I should provide some context to the cooler setup. My original stock cooler was super beat up, and I wanted to run a bigger...
Separate names with a comma.