NGK Iridium Spark Plugs Group Buy $85/set delivered

Discussion in 'For Sale by Businesses' started by rob260, Jul 1, 2018.

Thread Status:
Not open for further replies.
  1. rob260

    rob260 Administrator Staff Member

    Hey guys, been a while since we’ve had any group guy action so here’s something short and sweet...

    I need to get some plugs in stock, and the more I buy the cheaper they get. In addition it seems more than a few members struggle to figure out the “right” plugs for their application. In a nutshell all else being equal an iridium plug will make a bigger bang (ie more powwe) than a copper or platinum plug. Once you start upping boost you want a tighter gap and a colder heat range.

    I’ve got two plugs from the NGK iridium range that I recommend for TT

    1. For stock and mildly modified (up to one bar boost) we’re going with factory heat range and gap (1.1mm) in the NGK iridium IX series plug.

    2. For cats running more boost we’re going with one step colder and a smaller gap (.8mm) in the NGK iridium IX series.

    You can read all about the iridium IX series here https://www.ngk.com.au/products/spark-plugs/

    But doesn’t the factory plug feature an extended centre?

    Yes. The factory plug is a platinum type for longer life, and features an extended reach design to improve response at part throttle. Once you start to seek performance the iridium plug is advantageous over platinum, and a standard reach (compared to oem extended reach) plug reduces the chances of detonation. From a performance point of view the iridium IX plugs are ideal.

    I’ve heard that cooper plugs are better.

    Yes, but only in the same way that carbies are more reliable than fuel injection. Ie not at all.

    The best price I could find online was around $113/set. If I buy in wholesale qty I can get them at $85/set including redelivey to you. I need five orders (or more) including my own, and wait time is 7 days from close of group buy. If you want more than one set I can knock $5 off the second set as I’ll save money posting them together.

    Reply or PM if you want in.
     
    Last edited: Jul 1, 2018
  2. harty

    harty Member

    I’m in for 1xset of 1.1mm
     
  3. rob260

    rob260 Administrator Staff Member

    Cool bit of a response so far

    Harty—BKR6EIX-11–1 Set
    Procky—BKR7EIX—1 Set
    Steve W—BKR7EIX—1 Set
    Chris F—BKR7EIX—1 Set
     
  4. rob260

    rob260 Administrator Staff Member

    Cool bit of a response so far

    Harty—BKR6EIX-11–1 Set
    Procky—BKR7EIX—1 Set
    Steve W—BKR7EIX—1 Set
    Chris F—BKR7EIX—1 Set
    Tuff—BKR7EIX—2 Sets & BKR6EIX-11–2 Sets
     
    Last edited: Jul 2, 2018
  5. Boll!

    Boll! Well-Known Member

    Hi Rob.
    What would the max boost be around using the BKR7EIX?
    Will be using a CDI system.
    Thanks
    Col
     
  6. rob260

    rob260 Administrator Staff Member

    A lot, CDI is a real game changer. The plugs have a .8mm gap, which is good around 30psi with the HKSDLII so with proper CDI you’d expect to be able to push higher again before you need to gap it down.
     
  7. rob260

    rob260 Administrator Staff Member

    Very quiet but more than enough to go ahead. Will PM everyone on the list above so that we can wrap this up.
     
  8. Boll!

    Boll! Well-Known Member

    Hey Rob
    Throw us down for a set of BKR7EIX if it’s not too late
     
  9. rob260

    rob260 Administrator Staff Member

    All good mate will do
     
  10. rob260

    rob260 Administrator Staff Member

    Harty—BKR6EIX-11–1 Set
    Procky—BKR7EIX—1 Set
    Steve W—BKR7EIX—1 Set
    Chris F—BKR7EIX—1 Set
    Tuff—BKR7EIX—2 Sets & BKR6EIX-11–2 Sets
    Bill!—BKR7EIX—1 Set
     
  11. THZX

    THZX Member

    Put me down for a set of BKR7EIX.
     
  12. jellybeans

    jellybeans Active Member

    Hi rob
    can i get a set of the 0.8mm plugs please?
     
  13. harty

    harty Member

    Hi Rob,

    Just wondering if these have been sent out?

    Cheers
     
  14. rob260

    rob260 Administrator Staff Member

    Hi John just waiting on delivery at my end -had a couple of stragglers tacked on. I know they’re with fedex now so will post to confirm when they’re with aus post heading to you.
     
    harty likes this.
  15. rob260

    rob260 Administrator Staff Member

    Also just confirming group buy closed -I’ll have some excess for sale privately so PM me if interested but it will be limited by available stock.
     
  16. rob260

    rob260 Administrator Staff Member

    Parts are going out today to those who have any details -if you haven’t messaged your address to me please do so otherwise I’ll chase you up over the weekend.

    Thx
     
  17. rob260

    rob260 Administrator Staff Member

    Parts sent out for

    Tuff
    Harty
    Boll
    Chris
    Steve
    Procky

    Need addresses for Jellybeans & THZX.

    Two sets of BKR7EIX leftover, will honour group buy price for forum members.
     
  18. rob260

    rob260 Administrator Staff Member

    ..and all orders sent.

    Contact me via PM if you want one of the two remaining sets of BKR7EIX

    Thanks for playing.
     
    Last edited: Jul 29, 2018
Thread Status:
Not open for further replies.

Share This Page