ProckyZ from show to GO!

Discussion in 'Member's Garage' started by ProckyZ89, May 3, 2012.

  1. ProckyZ89

    ProckyZ89 Senior Member

    Update

    So I've decided to bite a bit of a bullet

    The engine is being removed shortly

    Installed will be
    Custom modified plazmaman style fmic
    Custom made 2.5" intercooler piping
    Ams 2.5" intercooler piping
    Robz62mm throttle bodies
    "The Lab" custom 2.5" turbo compressor inlet pipes
    Custom 2.5" intake pipes relocating intank to smic positions.
    Winfactory top feed fuel rail
    1300cc injectors (brand not locked in yet)
    Turbosmart 1200FPR
    2x 485lph walbros
    1x proflo inline filter
    1x proflo filter (yes 2)
    Turbosmart 18psi actuators
    Nistune update with flex fuel
    Eflex content analyser
    Hks DLi

    While this is being done,
    Wired in all new CAS, TPS connectors will be done. As will fitting up a few other sensors.
    Upgraded ground/power wire (custom)

    Big things ahead.

    I'm hoping I can get a read too once installing all the larger pipework and TB's on my existing 98 tune to see if there's a HP or torque gain anywhere.
     
  2. Madcow

    Madcow Active Member

    Have you seen the 1200c side feeds?
     
  3. ProckyZ89

    ProckyZ89 Senior Member

    Yes, won't cover what I want to do though and the spray pattern/atomisation on them is questionable
     
  4. Madcow

    Madcow Active Member

    Time for an event before this thing gets stripped down?
     
  5. ProckyZ89

    ProckyZ89 Senior Member

    What event and when ?

    Might be,
    I'm still waiting on some bits before I start doing some myself.
     
  6. Madcow

    Madcow Active Member

    I dunno, i have not really done anything for years. I will however have a zed to bring along for the first time in like 5 years.
     
  7. ProckyZ89

    ProckyZ89 Senior Member

    Next event for me is temora or snowy1000
     
  8. ProckyZ89

    ProckyZ89 Senior Member

    Adding in a Zeitronix ec2 with innovative motorsports ethanol content guage and fuel temp gauge

    Front under brace

    Installing the PLX dual widebands finally and PLX oil pressure on the spare oil tree port
     
  9. AndyMac

    AndyMac Better than you

    I know you've invested quite a bit into the zed already, but if you're truly going for speed at the snowy or temora, there are better vehicles for it for a lot less investment than what you'll be putting in.
     
  10. Shane001

    Shane001 Well-Known Member

    Ban this man [TIS]

    :p
     
  11. Madcow

    Madcow Active Member

    What do you suggest?
     
  12. Shane001

    Shane001 Well-Known Member

    Supercharged Jeep :p
     
  13. Chrispy

    Chrispy Pretentious Upstart

    Knowing Andy a Lambo :p
     
  14. AndyMac

    AndyMac Better than you

    No, you'd spend more on a Lambo chasing that 300km/hr over the km. Stock form mine would be in the 21 second, 270Km/hr bracket.

    800Hp out of an Evo or Golf R DG, or similar will get you there. You have an evo don't you?
     
  15. Shane001

    Shane001 Well-Known Member

    Or a big hp R35?
     
  16. ZedXTT

    ZedXTT #TEAMROB

    Ditch the VG and go something that will make big power easier and a gearbox setup dedicated to it.
     
  17. ProckyZ89

    ProckyZ89 Senior Member

    After putting around and giving the Evo a bit of a run on 300awkw

    I sorta wish I invested the $$ into it. For the cash I put into the zed id have a 500awkw sequential box Evo

    But, this is more just to get the zed where I wanted it to be.

    The best platform for this event if I had to pick would be a 32GTR with a 2spd sequential and some spastic engine
     
  18. ZedXTT

    ZedXTT #TEAMROB

    2spd sequential or auto? Either way you might want a leat one more gear for top end.

    Once you go e85 you would have to be near the 500rwkw make wouldn't you? Toss a ppg gear set in and some bigger tyres and your set for some fun.

    Though you will still have to walk it off the line at snowy and such with the unprepped surface. :br:
     
  19. BLACK BEAST

    BLACK BEAST SLICKTOP TT R-SPEC

    yeah the 5 speed with 4.10 is no good for the snowy


    3.69 is needed with 750rwhp to get close :p

    if only there was a 6 speed sequential KIT for the Z :(


    .
     
  20. ZedXTT

    ZedXTT #TEAMROB

    Bit like the blokes in the states doing the 1 mile racing, dont see much with power under 4 digits (american) being anywhere near competitive.
     

Share This Page