What have you done to your zed today? Part 4............

Discussion in 'Non Technical' started by Vader, Jun 17, 2014.

  1. Jinxed

    Jinxed Moderator

  2. ed300zx

    ed300zx Active Member

    Just got it back from Karl's (90TTZ):
    • Line up front bumper
    • Replace front fender liners
    • Replace both HID globes in the headlights
    • Plenum pull
    • Cleaned plenum
    • Replaced fuel filter and hoses
    • Automatic transmission system flush and service
    • Engine oil and filter changed
     
  3. xplodzx

    xplodzx Member

    a peek at the new rims that will be on my zed once the rebuild is complete
    [​IMG]
     
  4. Vader

    Vader Just another guy

    Not today (was last Friday actually), but paid the 370Z off. Almost 6 months early, but really needed to get rid of bills (and save interest) as I'm unemployed again.
     
  5. ZOE NZX300

    ZOE NZX300 zoe nzx300

    Painted and fitted new nismo tension rod bushes

    Picture of the after market polyurethane breaking up.
    [​IMG][/img]
    Painted and fitted the tension rods
    [​IMG][/img]
    [​IMG][/img]
    [​IMG][/img]
     
  6. Z32 TT

    Z32 TT Active Member

    Got my vbands from ezzupturbo he did an amazing job as always

    May need to mod firewall slightly to fit the 3" dumps but could be ok.

    [​IMG]

    [​IMG]

    Hopefully will help in quick fitting of side exit pipes at the drags. Oval 3" just behind the front wheels. For pure wank factor don't believe it will go any faster
     
  7. gibbon_tamer

    gibbon_tamer Member

    Shit yeh that's killa. U should start a build thread man
     
  8. 92z32tt

    92z32tt New Member

    Pu a TT diff back in the car ( scared of breaking the n/a one ) ... What i difference :(
     
  9. harty

    harty Member

    Nismo tension rods? Where can I get these from?
     
  10. ZOE NZX300

    ZOE NZX300 zoe nzx300

    The tension rods are OEM, fitted with nismo bushes

    I just resprayed the OEM rods with stricker added.
     
  11. harty

    harty Member

    Ahh i see, thanks
     
  12. OZX_320

    OZX_320 Detachable Member

    gots me an ab-flug gated shifter :D
     
  13. lidz

    lidz Well-Known Member

    ****it! Where from, that's 2 in like a month or so! Yahoo? Wanna sell???

    edit: my god this censorship is beyond ridiculous...
     
  14. attycuz

    attycuz Member

    Just had to google what one is, they look awesome :) are they expensive or just hard to find or probably both haha
     
  15. MagicMike

    MagicMike Moderator Staff Member

    For those not on FB, this was a couple of weeks ago
    [​IMG]

    Also, mickey mouse x 2 AEM widebands
    [​IMG]
    [​IMG]
     
  16. Jinxed

    Jinxed Moderator

    great effort, boost coming in at what rpm?
     
  17. Z32 TT

    Z32 TT Active Member

    ready to run a 10 :D

    are you gonna put e85 in it and re-tune for events?
     
  18. MagicMike

    MagicMike Moderator Staff Member

    We were starting to turn the boost up and dial in the controller to flatten out the boost curve when we got some missing. Swapped in brand new copper plugs and it got instantly worse so that was the end of that.

    Didn't get to the stage of screwing timing back in even.

    So new coilpacks and an ignition amp and try again. :)

    SAU QLD drag day on Sep 20. Paid my monies this morning :D

    Thanks to Karl for the good sesh ;)
     
  19. Z32 TT

    Z32 TT Active Member

    ughh that ignition problem :(

    good luck with the drag day cant wait to see what it does.
     
  20. OZX_320

    OZX_320 Detachable Member

    actually stumbled across it on the UK forum. Was more interested in the chrome plated bonnet catch assembly the seller was offering :p Unsure about the CF base, as it has been painted black... so yet to determine if its original or a replacement material.
     

Share This Page