QLD Performance Parts + wrecking car

I have decided I don't want to spend any more money on the Zed so it has to go or I will just keep pouring money into it. All of the funds will be going into my house deposit.

So here is a few items.

Stock engine apparently rebuilt at some stage, got it from Chrispy. Heads ported by Eric former A2Zed with heavy valve springs installed. New head gaskets installed. Doesn't blow any smoke makes good power, compression test to follow. Selling as a BARE engine. Can include stock cam gears/cams but wont be installed on engine.
Bare engine $1500 or $2100 with Jwt R4+ cams.

BDE intake cam gears 10000km use.
$450

Z1 adjustable exhaust cam gears.
$250

ATI Street damper.
$450

Plenum with larger 58mm? Z1 throttles type2.
$400

740cc Jecs injectors will include plugs.
$400

Haltech Platinum Pro Plugin ecu + map sensor and air temp sensor + input/output plug is pre wired also.
$1500

Quaife LSD with leader gears low km's since rebuild with new bearings.
$2500

GT28RS turbo's from Z1 about 10000km use + custom oil lines for easy install.
$2000

Complete custom made 3" Exhaust, 5 bolt ams dumps ceramic coated (a bit scratched up), high flow cats, one of the front pipes has a few dents from driving over rocks but doesn't affect performance, 2 resonators in the catback, magnaflow X pipe, twin magnaflow race mufflers also has 2 wideband bungs in front pipes.
$1200

Volk GT-C 17" wheels, front 8 +35, rear 9" +34. No gutter rash but the chrome lip has been damaged in some spots by something?
$1200

AMS exhaust manifolds, ceramic coated black.
$500

R33 GTR Brembo Calipers.
$900

4x Braided Brake lines ADR approved.
$200

Stock Recircs with BDE goose honk kit fitted.
$70

Nagisa Fender Braces.
$280

Twin Z type 1 rear wing un-fitted + Light. Local pickup only.
$450

Specialty Z high capacity oil pan with trap doors.
$550

Z1 platinum steel driveshaft only ~1000km's use. No vibrations, uses the stock rear cv type joint,
hardy spicer yoke. cost was $800 landed in Aus.
$600

Powertrix Ultralight coilovers.
$1000

UAS type 2 front Camber arms.
$500

Dashboard in very good condition from a 96 model. Pick up only.
$250

Leather seats front and back re-trimmed at some stage fair condition no rips/tears. Pickup only.
$500

Black door trims from late model zed modified for seat belt on the door, good condition. Pick up only.
$200

UAS front strut brace, white.
$150

UAS rear strut brace, powder coated black
$150

Ultra Racing tension rod brace.
$100

Carcraze 56mm radiator barely used.
$100

All prices are plus postage.

That's most of the big stuff, car is still complete so will take some time to strip it down and check parts. Open to reasonable offers. Prefer local pick up on all the larger items.

 

Just asking, but what type of BDE gears are they, , the series 1's or 2's

 

Series 1.

 

Pm sent

 

pm sent

Carcraze 56mm radiator barely used.
$100

pm sent but would i be right to assume its for a manual?

 

Ill take the fender braces as per pm. Should be able to organise pick up aswell

 

Very interested in motor pending compression test results

Cheers
Michael

 

Also have rear subframe with d-project camber arms and traction rods, spl titanium hicas lock out that replaces the stock joints with heim joints, ES bushes throughout and the main mounts have alloy bushes. includes rebuilt calipers and RDA rotors with A1RM pads in there. Will sell complete for
$800 pick up only.

 

fender braces are sold pending payment.

 

few pic I already have, more photo's to come.





installed to subframe now.

 

The rear housing on the turbo's have also been ceramic coated.

 

Not the best photo's but it's dark in the garage.

Leather Re-trimmed panels, glovebox, centre console, underdash drivers side, and in the back.
$500 pick up only

 

Interior

PM'd about interior.

 

Compression test done all cylinders within 5psi, keep in mind the high lift cams will reduce static compression. Engine made 460hp@20psi only a few weeks back on the Godzilla Motorsports dyno.

I will sell the engine for $3000 with bde/z1 gears, ATI damper and timing belt (200k service was done about 10k ago with ramey Z idler studs and one of those blue kevlar belts.

 

I put the wrong pic up the end there I gave it a few more cranks and it went up to 150.

 

How much for the whiteline front sway bar?

Abraham

 

$160 Plus postage.

Also have a big rear one think the brand was CMR 27mm
$120 plus postage.

 

Thanks for that. How much would it cost to get it posted to 3015 VIC?

Abraham

 

Near new centre console surround, ash tray and near new leather boot with red stiching.
$60 + post.



Gear knob near new.
$50 + post.



A-pillar finishers near new + near new autometer boost gauge already installed. Selling together.
$150 + post.

 

Gizzmo MS-IBC boost controller near new.
$180 + post



Series 2 CAS brand new never fitted.
$250 + post.



Brand new Earls thermostatic oil sandwich plate 10AN fittings with right angle aeroflow fittings, I test fitted it with my setup and it would of fit okay.
$150 + post.



Innovative wideband controller, comes with sensor that was replaced tnot that long ago. Work great with nistune.
$100 + post.



ECU is now out. Forgot to say it also comes with boost control solenoid, it just needs some barbs.